Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10B is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 600mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke600 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10B
The AirTAC SAIF63X600S-10B is a double-acting ISO 15552 profile cylinder featuring a built-in 4M310-10 5/2 solenoid valve. This specific SKU is configured with a DC24V terminal electrical entry consuming 3.0 W, a PT3/8 cylinder port, and a 3/8 valve port yielding a 30.0 mm2 flow (Cv 1.68). The integrated manifold uses O10 x O6.5 PU tubing to bridge the valve and cylinder. Because the valve operates at 0.15-0.8 MPa, the practical working pressure for this assembled unit is 0.15-0.8 MPa, despite the bare cylinder rating of 1.0 MPa. At 0.5 MPa it delivers 1559 N of push force.
By driving itself from one coil signal, this unit eliminates the need for a separate remote valve, saving panel space and tubing runs in decentralized machine stations. The factory setting retracts the piston rod when the coil is energised, but this can be reconfigured to extend-when-energised simply by repositioning the valve. The -S suffix denotes an integrated magnet for position sensing, designed to work seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×600 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10B Is Used
Decentralized Automation Cells
Ideal for large machines with multiple stations, eliminating long tubing runs by switching locally via the built-in 4M310 valve.
Extended Stroke Material Handling
The 600 mm stroke provides the reach needed for pushing or lifting products on a conveyor, while the 5/2 valve ensures rapid 4 cycle/sec response.
Retrofit Space-Tight Machines
Perfect for upgrading older equipment where adding a remote valve island is physically impossible or wiring-prohibitive.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10B the Right Choice?
Choose this 63 mm bore when a 50 mm bore (providing 982 N push at 0.5 MPa) is insufficient, but an 80 mm bore (delivering 2513 N) would be physically oversized. The 600 mm stroke falls well within the 1500 mm maximum standard stroke for this bore. For any stroke of 300 mm or longer, such as this one, it is critical to use proper guide rails to prevent excessive side-loading on the piston rod, as the air cushions (30 mm stroke) only decelerate the load near the end caps. The built-in valve routes air but does not lock the load; if true mechanical load-holding is required, consider the SAIL lock variant instead. To replace this unit, match the 63 mm bore, 600 mm stroke, PT3/8 cylinder port, 3/8 valve port, DC24V terminal coil, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10B FAQ
At 0.5 MPa, this 63 mm bore cylinder generates 1559 N of push force and 1402 N of pull force. The integrated 4M310-10 valve provides an effective area of 30.0 mm2 (Cv 1.68) with a maximum frequency of 4 cycles per second.
No, the SAIF63X600S-10B has a built-in 4M310 5/2 valve actuated by a DC24V (3.0 W) terminal coil. By default, the rod retracts when the coil is energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.