Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10A is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 700mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke700 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10A
The AirTAC SAIF63X700-10A is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve. Featuring a 63mm bore and 700mm stroke, it delivers 1559N of push force at 0.5 MPa. The integrated valve offers a 30.0 mm2 effective orifice (Cv 1.68) and is driven by an AC220V terminal connection coil consuming 3.5 VA. Because the valve manifold uses O10 x O6.5 PU tubing, the 3/8" valve port is distinct from the cylinder's PT3/8 port.
While the cylinder body rates up to 1.0 MPa, the practical working pressure for this self-switching assembly is 0.15-0.8 MPa. Factory set to retract the rod when the coil is energised, the valve can be repositioned to extend-when-energised. By controlling itself from a single electrical signal, it eliminates remote plumbing and saves panel space, making it ideal for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×700 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10A Is Used
Decentralized Automation
Eliminates the need for a remote valve bank, allowing independent cylinder control across large factory layouts using only an AC220V signal.
Long-Stroke Assembly
Provides 1559N push force over a 700mm stroke for extending and retracting heavy workpieces in confined machinery spaces.
Retrofit & Upgrade
Ideal for upgrading older pneumatic lines where adding new valve tubing is impractical, leveraging the built-in 4M310 manifold.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10A the Right Choice?
Choose this 63mm bore when 50mm (982N push at 0.5 MPa) is insufficient but 80mm (2513N push) is oversized. The SAIF63X700-10A shines in decentralized layouts where routing separate valve tubing is costly, as the integrated 4M310 valve handles switching directly at the cylinder. The AC220V terminal coil suits standard factory power, and the standard carbon steel rod handles long-stroke demands.
For this 700mm stroke, add an external guide to prevent side-load wear on the cylinder. To replace this unit, match the 63mm bore, 700mm stroke, 10 (3/8") valve port, PT3/8 cylinder thread, AC220V voltage, and terminal entry. Note that the 5/2 valve routes air but does not lock the load; for position holding without live pressure, consider a SAIL lock cylinder.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10A FAQ
The built-in 4M310-10 valve has a 30.0 mm2 effective area (Cv 1.68). The 63mm bore cylinder generates 1559N push and 1402N pull force at 0.5 MPa.
No, the 5/2 valve routes air but does not lock the load without live pressure. It is factory set to retract when energised but can be repositioned to extend, removing the need for a separate remote valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.