Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10B is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 700mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke700 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10B
The AirTAC SAIF63X700-10B is a double-acting ISO 15552 profile cylinder featuring a built-in 4M310-10 5/2 solenoid valve. This integrated assembly delivers a 1559N push force at 0.5 MPa and utilizes a DC24V terminal coil drawing 3.0W. The 4M310 valve provides a 30.0mm2 effective area (Cv 1.68) and switches up to 4 cycles per second. Because the valve manifold mounts directly to the cylinder using O10xO6.5 PU tubing, it eliminates remote plumbing and saves panel space.
While the bare cylinder rates to 1.0 MPa, the practical operating range for this valved unit is 0.15-0.8 MPa. The factory default setting retracts the piston rod when the coil is energised, but you can reposition the valve to extend-when-energised. The cylinder features a PT3/8 port, while the valve itself uses a PT3/8 port. It operates at speeds of 30-800 mm/s and includes adjustable air cushions at both ends to decelerate the rod near stroke limits.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×700 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10B Is Used
Decentralized Stations
Ideal for large machines with multiple stations, eliminating long air tubes by mounting the valve directly on the cylinder for localized control.
Material Handling
Provides robust 1559N push force to divert or gate heavy packages on automated conveyors without needing separate valve banks.
Space-Tight Machines
Saves valuable panel space and simplifies wiring in compact assemblies by integrating the 4M310 valve directly onto the actuator.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10B the Right Choice?
Choose this 63mm bore when a 50mm cylinder (982N push at 0.5 MPa) is underpowered, but an 80mm bore (2513N) is excessive. The SAIF63X700-10B excels in decentralized installations where running separate valve tubing back to a main manifold is costly or impractical. With a 700mm stroke, this unit requires a guide to prevent side-loading and ensure smooth rod travel. The 5/2 valve routes air but does not lock the load; if you need true load-holding, select an AirTAC SAIL lock cylinder instead.
When replacing this unit, verify the 63mm bore, 700mm stroke, PT3/8 valve port, DC24V terminal coil, and PT thread type. Because no magnet is specified, it will not trigger CMSE or DMSE sensors. The carbon steel rod handles standard pneumatic loads, and the self-contained valve design simplifies machine wiring by requiring only a single DC24V signal to drive the actuator.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10B FAQ
At 0.5 MPa, this 63mm bore cylinder generates 1559N of push force and 1402N of pull force. The built-in 4M310-10 valve has an effective area of 30.0mm2 (Cv 1.68) and supports a maximum frequency of 4 cycles per second.
The integrated 5/2 valve is driven by a DC24V terminal coil (3.0W, IP65). By factory default, energising the coil retracts the rod, but this can be reconfigured to extend-when-energised. The valve routes air and does not lock the load; it is not a brake or clamp.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X700-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.