Airtac SAIF Series Standard Cylinder with Valve SAIF63X700S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X700S-10A is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 700mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke700 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X700S-10A
The AirTAC SAIF63X700S-10A is a double-acting profile cylinder with a built-in 4M310-10 5/2 solenoid valve, delivering a Cv of 1.68 and a 30.0 mm2 effective area. Driven by an AC220V terminal coil consuming 3.5 VA, it switches itself from a single electrical signal. The integrated manifold connects via PU tubing (O10 x O6.5) to the cylinder port, meaning the 3/8" valve port differs from the cylinder's PT3/8 thread. Because the valve operates at 0.15-0.8 MPa, this defines the practical working range for the assembled unit, even though the bare cylinder rates to 1.0 MPa.
Providing 1559 N of push force at 0.5 MPa and 2805 N at 0.9 MPa, this 63mm bore unit includes a magnet for CMSE reed and DMSE solid-state sensors. The factory setting retracts the rod when the coil is energised, but you can reposition the valve to extend-when-energised. By eliminating remote valves and separate plumbing, it excels in decentralized installations across large machines, reducing panel space and tubing complexity.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X700S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X700S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X700S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×700 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X700S-10A Is Used
Decentralized Machine Stations
Eliminates the need for a remote valve bank on large assembly lines, driving the 700mm stroke directly from a local AC220V signal.
Space-Constrained Automation
Integrates the 4M310-10 valve directly on the profile body, saving panel space and cutting tubing runs in tight robotic cells.
Retrofit & Upgrades
Ideal for upgrading older machines where running new pneumatic tubing back to a central manifold is costly or physically blocked.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X700S-10A the Right Choice?
Choose this self-valved SAIF63X700S-10A when a decentralized station needs a 700mm stroke with 1559 N push force at 0.5 MPa. If you need less force, the 50mm bore offers 982 N at 0.5 MPa; if your load is higher, the 80mm bore provides 2513 N at 0.5 MPa. The AC220V terminal entry and PT3/8" cylinder port with a 3/8" valve port simplify wiring and air supply matching. Because the stroke is 700mm, ensure adequate guide support to handle side loads and prevent rod deflection. Remember that the built-in 5/2 valve routes air but does not lock the load; for position holding under zero pressure, consider a SAIL lock or BSAI clamp-lock cylinder instead. Replacement units must match the 63mm bore, 700mm stroke, 3/8" valve port, AC220V voltage, terminal entry, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X700S-10A FAQ
The 63mm bore generates 1559 N of push force at 0.5 MPa and 2805 N at 0.9 MPa. The built-in 4M310-10 5/2 valve provides an effective area of 30.0 mm2 (Cv 1.68) with a maximum frequency of 4 cycles per second.
No, the integrated 4M310 valve switches the cylinder directly from an AC220V terminal coil signal. By default, the piston rod retracts when energised, but you can reposition the valve to extend-when-energised. The valve holds its position by internal pilot pressure, not a spring.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X700S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.