Airtac SAIF Series Standard Cylinder with Valve SAIF63X75S-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X75S-10B is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 75mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke75 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X75S-10B
The AirTAC SAIF63X75S-10B is a double-acting ISO 15552 profile cylinder with a built-in 4M310-10 5/2 solenoid valve, yielding a 30 mm2 effective area (Cv 1.68). Driven by a DC24V terminal coil drawing 3.0 W with an IP65 rating and a 0.05 s response time, it eliminates the need for a separate remote valve. The integrated manifold uses O10 x O6.5 PU tubing to bridge the valve and the PT3/8 cylinder port.
Because the 5/2 valve operates at 0.15-0.8 MPa, the practical working range for the assembled SAIF unit is 0.15-0.8 MPa, even though the cylinder body rates to 1.0 MPa. This specific SKU includes a magnet for position sensing via AirTAC CMSE reed or DMSE electronic switches. By default, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised. Operating speed spans 30-800 mm/s.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X75S-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X75S-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X75S-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×75 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X75S-10B Is Used
Decentralized Automation
Ideal for large factory lines where running individual valve tubing back to a main panel is costly. The integrated 4M310 valve lets this 63 mm cylinder switch itself locally from one DC24V signal.
Mid-Force Actuation
Delivers 1559 N of push force at 0.5 MPa. Suited for moderate clamping, lifting, or pressing tasks on space-tight machinery where an external valve would clutter the envelope.
Position-Sensed Handling
The -S magnet enables tracking by CMSE or DMSE sensors. Use it in material handling routines that need to verify stroke endpoints before initiating the next machine cycle.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X75S-10B the Right Choice?
Choose this 63 mm bore when you need substantial thrust—1559 N push and 1402 N pull at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N push at 0.5 MPa; for heavier loads, the 80 mm bore provides 2513 N push at 0.5 MPa. The self-valved SAIF design excels in decentralized stations across large machines, cutting panel space and tubing runs. A single DC24V terminal electrical connection controls the cylinder directly.
For replacements, match the 63 mm bore, 75 mm stroke, PT3/8 cylinder port, 4M310-10 valve with PT3/8 port, DC24V voltage, terminal entry, and the -S magnet. Note that the built-in 5/2 valve routes air and is not a mechanical lock; if you need true load-holding under zero pressure, consider the SAIL lock variant. The standard carbon steel rod suits general industrial use.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X75S-10B FAQ
At 0.5 MPa, this 63 mm bore cylinder generates 1559 N of push force and 1402 N of pull force. The integrated 4M310-10 5/2 valve provides an effective area of 30 mm2 (Cv 1.68) with a maximum frequency of 4 cycles per second.
The DC24V coil drives the 5/2 valve directly—no separate remote valve is needed. By factory default, energising the coil retracts the rod, but you can reposition the valve to extend-when-energised. The valve routes air and is not a lock; it will not hold the load without live pressure.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X75S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.