Airtac SAIF Series Standard Cylinder with Valve SAIF63X800-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X800-10A is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 800mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke800 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X800-10A
The AirTAC SAIF63X800-10A is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve. This integrated manifold block uses O10 x O6.5 PU tubing to switch the cylinder directly, eliminating the need for remote plumbing. Driven by an AC220V terminal coil drawing 3.5 VA, it activates in 0.05 s and carries an IP65 rating. The 4M310 valve delivers a 30.0 mm2 effective area (Cv 1.68) and cycles up to 4 times per second.
While the bare cylinder rates to 1.0 MPa, the practical operating range for this assembled SAIF unit is 0.15-0.8 MPa. The 63 mm bore generates 1559 N of push force at 0.5 MPa (2182 N at 0.7 MPa). Factory-set to retract the rod when the coil is energised, the valve can be repositioned to extend-when-energised if your sequence demands it. This self-contained design is ideal for decentralized stations across large machines.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X800-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X800-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 800 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X800-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×800 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X800-10A Is Used
Decentralized Automation
Perfect for large-scale production lines needing localized control. The integrated valve cuts tubing runs and simplifies maintenance across sprawling factory floors.
Extended-Reach Handling
The 800 mm stroke suits part ejection and transfer tasks. Ensure external guides support the rod to handle side loads during long-travel movements.
Space-Constrained Retrofits
Upgrade older machines where running new valve tubing is costly. The terminal entry and built-in 4M310 valve deliver compact, all-in-one actuation.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X800-10A the Right Choice?
Select this 63 mm bore when 50 mm falls short (982 N push at 0.5 MPa) but 80 mm is excessive (2513 N push at 0.5 MPa). The 800 mm stroke provides ample reach, but at this length you must account for side-load inertia and use a proper guide to prevent rod bending. The 4M310-10 valve features a 3/8" PT port, distinct from the cylinder's 3/8" PT port, ensuring high flow for the 30-800 mm/s speed range.
Choose this self-valved SAIF configuration over a separate cylinder and remote valve to slash panel space and wiring complexity. It provides live pressure routing but is not a lock; if you need true load-holding, consider the SAIL lock series instead. To replace this exact unit, match the 63 mm bore, 800 mm stroke, 10 valve port, AC220V voltage, terminal entry, and PT thread.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X800-10A FAQ
At 0.5 MPa, the 63 mm bore provides 1559 N of push force and 1402 N of pull force. If you increase the pressure to 0.7 MPa, the push force reaches 2182 N.
The built-in 4M310-10 5/2 valve allows the cylinder to switch itself from one coil signal, saving panel space and tubing. By default, the rod retracts when the AC220V coil is energised, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X800-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.