Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10A is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 100mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke100 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10A
The AirTAC SAIF80X100-10A is a double-acting ISO 15552 profile cylinder featuring a built-in 4M310-10 5/2 solenoid valve. This integrated manifold uses O10 x O6.5 PU tubing to link the PT3/8 cylinder ports to the PT1/2 valve ports, delivering a Cv of 1.68. Equipped with an AC220V terminal coil drawing 3.5 VA, it responds in 0.05s. The cylinder body rates to 1.0 MPa, but the internal pilot valve limits the practical SAIF operating pressure to 0.15-0.8 MPa. At 0.5 MPa it yields 2513N of push force, scaling to 4523N at 0.9 MPa.
By default, the factory setting retracts the piston rod when the coil is energised, but you can reconfigure it to extend-when-energised by repositioning the valve. This self-switching design requires just one coil signal to operate, eliminating remote plumbing and saving panel space for decentralized machine stations. The carbon steel piston rod and extruded aluminum barrel provide durable, dimensionally interchangeable mounting per ISO 15552.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×100 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10A Is Used
Decentralized Automation
Ideal for large factory lines where running individual valve tubing back to a main panel is costly, as this cylinder switches itself locally from one AC220V signal.
High-Force Clamping
Delivers 2513N of push force at 0.5 MPa directly at the workpiece, perfect for securing heavy components during precision machining without external valves.
Space-Constrained Machinery
The integrated 4M310 valve manifold saves valuable panel and footprint space in compact machine builds while providing a 1.68 Cv flow rate.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10A the Right Choice?
Choose this 80mm bore when a 63mm bore falls short (delivering 1559N push at 0.5 MPa) or a 100mm bore is excessive (providing 3927N at 0.5 MPa). The SAIF80X100-10A excels over a separate cylinder and remote valve setup by cutting tubing runs, minimizing wiring, and enabling decentralized control across large machines. Because the built-in 5/2 valve routes air and holds position via pilot pressure, it does not lock the load without live air; for true mechanical holding, select the SAIL lock or BSAI clamp-lock cylinder. Replacement requires matching the 80mm bore, 100mm stroke, 10 (3/8") valve port, AC220V voltage, PT thread, and terminal entry. This 100mm stroke is short enough that side-load guides are not strictly necessary, but ensure adequate load support for the 25mm rod.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10A FAQ
At 0.5 MPa, this 80mm bore cylinder provides 2513N push force and 2268N pull force. The built-in 4M310-10 valve has a 30.0 mm2 orifice with a Cv of 1.68.
No, the integrated 5/2 valve switches the cylinder directly from one AC220V coil signal. By factory default, energising the coil retracts the rod, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.