Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10B is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 100mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke100 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10B
The AirTAC SAIF80X100-10B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This specific SKU is configured with a DC24V terminal coil that draws just 3.0 W, actuating in 0.05 s or less with an IP65 rating. The built-in valve provides a 30.0 mm2 effective orifice (Cv 1.68) and cycles up to 4 times per second. Because the manifold block links the valve to the cylinder via O10 x O6.5 PU tubing, you get decentralized control without a separate remote panel.
This self-switching assembly delivers 2513 N of push force and 2268 N of pull force at 0.5 MPa. While the bare cylinder body rates to 1.0 MPa, the practical operating pressure for the valved unit is 0.15-0.8 MPa, yielding smooth speeds of 30-800 mm/s. Factory-set to retract the piston rod when the coil is energised, the valve can be repositioned to extend-when-energised if your machine logic requires it. The standard carbon steel rod and PT3/8 cylinder port ensure robust, dimensionally interchangeable mounting.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×100 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10B Is Used
Decentralized Automation Stations
Ideal for large machines with multiple actuation points, eliminating long pneumatic tubing runs by processing the 5/2 valve logic directly at the cylinder body.
High-Force Clamping Fixtures
Delivers 2513 N of push force at 0.5 MPa for securing heavy workpieces, using the integrated 4M310-10 valve to cycle up to 4 times per second.
Retrofit Machine Upgrades
Drops into existing ISO 15552 dimensional footprints, replacing standard cylinders where adding a separate DC24V remote valve would require extensive rewiring.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10B the Right Choice?
Choose this 80 mm bore when a 63 mm neighbor (delivering 1559 N push at 0.5 MPa) lacks the thrust for your tooling, but a 100 mm unit is physically too large. The SAIF80X100-10B excels in space-tight machines where running pneumatic tubing back to a central manifold is costly or complex. By driving the cylinder from a single DC24V terminal signal, you eliminate remote plumbing and slash panel space. If your stroke needs to hold position under load without live air pressure, note that this 5/2 valve routes air but does not lock; you would need an AirTAC SAIL clamp-lock cylinder for that function.
For replacements, verify the 100 mm stroke, PT3/8 cylinder port, and the exact 4M310-10 valve with a port 10 (3/8) interface. Ensure the DC24V terminal electrical entry matches your control voltage, and note that this unit omits the -S magnet, so position sensing via CMSE or DMSE switches is not supported without changing the piston. At 100 mm stroke, side-load is minimal, but always use proper guide rails for heavy offset loads.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10B FAQ
At 0.5 MPa, this 80 mm bore cylinder generates 2513 N of push force and 2268 N of pull force. The integrated 4M310-10 5/2 valve has an effective area of 30.0 mm2 (Cv 1.68), providing ample flow for the cylinder to operate at speeds between 30-800 mm/s.
No separate remote valve is needed; the 4M310 valve is internal piloted and switches from a single DC24V terminal coil signal. The factory default retracts the rod when energised, but you can reposition the valve to extend-when-energised. The practical operating pressure is 0.15-0.8 MPa.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X100-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.