Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000-10A is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 1000mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke1000 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000-10A
The AirTAC SAIF80X1000-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This specific configuration pairs an 80mm bore with a 1000mm stroke, delivering a robust 2513N push force at 0.5 MPa. The built-in valve provides a 30.0 mm2 effective area (Cv 1.68) and operates at a maximum frequency of 4 cycles per second. It is equipped with a standard carbon steel piston rod and PT tapered threads. Because the manifold block routes air directly via PU tubing (O10 x O6.5), the valve port (3/8") differs from the cylinder port (3/8") and eliminates the need for separate remote valve plumbing.
This assembly is driven by an AC220V terminal-entry coil consuming 3.5 VA, featuring IP65 protection and a rapid 0.05s activation time. While the cylinder body itself is rated for 1.0 MPa, the practical operating range for the SAIF unit is 0.15-0.8 MPa due to the internal pilot pressure requirements of the built-in valve. By default, the piston rod retracts when the coil is energised, but this can be reconfigured to extend-when-energised simply by repositioning the valve. The unit is not equipped with a magnet (-S), meaning CMSE reed or DMSE electronic sensors cannot be used without modification.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×1000 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000-10A Is Used
Decentralized Automation Stations
Ideal for large-scale production lines where running individual valve tubing back to a central manifold is costly. The integrated 4M310 valve allows this 80mm cylinder to control itself from a single AC220V signal.
Long-Stroke Material Handling
The 1000mm stroke provides extended reach for pushing, lifting, or sorting heavy items on conveyors. The robust 2513N force at 0.5 MPa handles substantial loads with ease.
Space-Constrained Machine Retrofitting
Perfect for upgrading older machines where panel space is at a premium. The built-in valve eliminates the need to mount a separate 5/2 solenoid valve near the cylinder, simplifying the retrofit.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000-10A the Right Choice?
Select this 80mm model when your application requires substantial thrust (2513N push at 0.5 MPa) over a long 1000mm span. If you need less force, stepping down to the 63mm bore yields 1559N push at 0.5 MPa while saving envelope space; conversely, moving up to the 100mm bore provides 3927N push at 0.5 MPa for heavier loads. The self-valved SAIF design is superior to a separate cylinder and remote valve when you need decentralized stations across a large machine, as it drastically reduces panel space and tubing runs. A single AC220V terminal connection drives the entire actuator.
When ordering a replacement, verify the 80mm bore, 1000mm stroke, 4M310-10 valve (3/8" port), AC220V voltage, terminal entry, and PT thread type. Note that this 1000mm stroke is at the upper end of the standard range (max 1500mm for 80mm bore), so careful mounting is required to prevent excessive side loading and guide rod binding. Remember that the 5/2 valve routes air but does not hold the load without live pressure; for true mechanical locking, consider the SAIL series instead.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000-10A FAQ
The 80mm bore cylinder provides a push force of 2513N and pull force of 2268N at 0.5 MPa. The integrated 4M310-10 valve has an effective area of 30.0 mm2 (Cv 1.68) and supports a maximum frequency of 4 cycles per second.
By factory default, the piston rod retracts when the AC220V coil is energised. This behavior can be reconfigured to extend-when-energised by physically repositioning the built-in 5/2 valve on the manifold block. The valve holds its position via internal pilot pressure, not a spring.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.