Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10A is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 1000mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke1000 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10A
The AirTAC SAIF80X1000S-10S is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This built-in valve delivers a 30.0 mm2 orifice (Cv 1.68) and operates at 0.15-0.8 MPa, which dictates the practical working pressure for the assembled unit even though the bare cylinder rates to 1.0 MPa. Equipped with a -S magnet for CMSE reed and DMSE electronic sensors, it provides 4523N of push force at 0.9 MPa.
Driven by an AC220V terminal-entry coil drawing 3.5 VA, the unit activates in 0.05s. By default, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised. The manifold links the valve to the cylinder via O10 x O6.5 PU tubing, meaning the 1/2 inch cylinder port and 3/8 inch valve port are distinct. This self-contained design eliminates remote plumbing, saving panel space for decentralized stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×1000 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10A Is Used
Decentralized Machine Stations
Ideal for large factory layouts where running individual valve tubing back to a central manifold is costly and complex.
Long-Stroke Material Handling
The 1000mm stroke and 4523N force handle heavy push applications, provided external guides support the rod against side loads.
Space-Constrained Retrofits
Drop-in ISO 15552 interchangeability with a built-in valve minimizes the physical envelope compared to separate cylinder and valve setups.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10A the Right Choice?
Select this 80mm bore when a 63mm bore (offering 2805N push at 0.9 MPa) is insufficient, but a 100mm bore (7068N push) is excessive. The 1000mm stroke is substantial and requires external guide support to prevent rod sag and side-load damage. Choose this self-valved SAIF configuration over a separate cylinder and remote valve when decentralizing a large machine, as it slashes tubing runs and wiring complexity.
For replacements, verify the 80mm bore, 1000mm stroke, 4M310-10 valve with 3/8 inch PT thread port, AC220V voltage, terminal entry, and the -S magnet. Note that the 5/2 valve routes air and the end cushions only decelerate near stroke end; neither holds the load unpowered. For true mechanical locking, use an AirTAC SAIL cylinder instead.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10A FAQ
At 0.9 MPa, the 80mm bore generates 4523N of push force and 2268N of pull force. The maximum force at 1.0 MPa is 513 kgf.
Yes. The factory setting retracts the rod when the AC220V coil is energised, but you can reposition the 5/2 valve on the manifold block to extend-when-energised. It holds position by pilot pressure, not a spring.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.