Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10B is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 1000mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke1000 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10B
The AirTAC SAIF80X1000S-10B is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve, providing an effective flow of Cv 1.68. Driven by a DC24V terminal coil drawing 3.0 W, it switches itself from a single electrical signal, eliminating remote plumbing. While the bare cylinder rates to 1.0 MPa, the integrated valve limits the practical operating pressure to 0.15-0.8 MPa. The 80mm bore generates 2513N of push force at 0.5 MPa, utilizing a carbon steel rod and an -S magnet for CMSE reed or DMSE electronic sensors.
Factory configured to retract the rod when the coil is energised, the valve can be physically repositioned to extend-when-energised if your cycle logic requires it. The manifold connects to the cylinder via PU tubing (O10 x O6.5), and it is critical to note the valve port is 3/8" while the cylinder port is also 3/8". This decentralized design drastically cuts panel space and tubing runs across large machinery.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×1000 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10B Is Used
Decentralized Assembly Stations
Eliminates the need to run long valve tubing back to a central panel, driving the 80mm bore directly from a local DC24V signal.
Large Machine Transfer
Provides 2513N of push force at 0.5 MPa for moving heavy pallets or fixtures over a 1000mm stroke within tight machine envelopes.
Retrofit Automation
Ideal for upgrading existing lines where adding a separate valve island is too costly, using the built-in 4M310-10 manifold and PU tubing.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10B the Right Choice?
Choose this 80mm bore when a 63mm neighbour (delivering 1559N push at 0.5 MPa) is insufficient, or step down if 2513N is excessive. A self-valved SAIF excels over a separate cylinder and remote valve when decentralizing stations across a large machine, saving wiring and pneumatic tubing. This SKU specifies a DC24V terminal entry, PT tapered threads, and an -S magnet. For a 1000mm stroke, external guide rails are strongly recommended to manage side loads and prevent rod binding. Remember the 5/2 valve routes air but does not lock the load; if you need true mechanical holding, consider the SAIL lock series instead.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10B FAQ
The 80mm bore generates 2513N of push force and 2268N of pull force at 0.5 MPa. The built-in 4M310-10 valve provides an effective area of 30.0 mm2 (Cv 1.68) with a max frequency of 4 cycles per second.
No, the 5/2 valve routes air but cannot lock the load without live pressure. This model uses a DC24V terminal coil (3.0 W, IP65). By default, the rod retracts when energised, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X1000S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.