Airtac SAIF Series Standard Cylinder with Valve SAIF80X100S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X100S-10A is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 100mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke100 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X100S-10A
The AirTAC SAIF80X100S-10S is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve. This integrated valve delivers a Cv of 1.68 and a 30.0 mm2 effective orifice, driving the 80mm bore to generate 2513N of push force at 0.5 MPa. Because the cylinder body rates to 1.0 MPa but the internal pilot valve operates at 0.15-0.8 MPa, the practical working range for this assembled unit is 0.15-0.8 MPa. It includes a magnet for position sensing using CMSE reed or DMSE electronic switches.
This model uses an AC220V terminal coil consuming 3.5 VA, features IP65 protection, and activates in 0.05 s or less. By default, the factory setting retracts the piston rod when the coil is energised, but you can reconfigure it to extend-when-energised simply by repositioning the valve. The manifold connects to the cylinder via PU tubing (O10 x O6.5), and the valve port code 10 (3/8") differs from the cylinder port PT3/8, ensuring optimal airflow without confusing the two connections.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X100S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X100S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X100S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×100 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X100S-10A Is Used
Decentralized Assembly Lines
Ideal for large machines with decentralized stations, switching itself from one coil signal to save panel space and reduce valve tubing.
High-Force Clamping
Delivers 2513N of push force at 0.5 MPa, suitable for heavy-duty clamping and holding tasks in automated manufacturing.
Space-Constrained Retrofits
Perfect for machine upgrades where running new remote valve plumbing is costly, offering a compact cylinder and valve bundle.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X100S-10A the Right Choice?
Choose this 80mm bore when you need higher force than the 63mm bore (1559N push at 0.5 MPa) but less than the massive 100mm bore (3927N). The self-valved SAIF design is ideal for decentralized stations across a large machine, eliminating remote valves and cutting panel space and plumbing. For this AC220V terminal entry model, ensure your control system matches the PT thread type and 3.5 VA power draw. If your machine requires true load holding without live pressure, note that the 5/2 valve routes air but does not lock; consider the SAIL lock cylinder instead. To replace this unit, match the 80mm bore, 100mm stroke, 3/8" valve port, AC220V voltage, terminal entry, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X100S-10A FAQ
At 0.5 MPa, the 80mm bore generates 2513N of push force and 2268N of pull force. The built-in 4M310-10 valve provides a Cv of 1.68 and 30.0 mm2 effective area to drive these loads.
No, the 5/2 solenoid valve routes air but does not lock the load without live pressure. By default, the factory setting retracts the rod when the AC220V coil is energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X100S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.