Airtac SAIF Series Standard Cylinder with Valve SAIF80X150-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X150-10A is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 150mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke150 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X150-10A
The AirTAC SAIF80X150-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This built-in valve provides an effective flow rate of 30.0 mm2 (Cv 1.68) and operates at a maximum frequency of 4 cycles per second. Configured with an AC220V terminal coil consuming 3.5 VA, it activates in 0.05 seconds or less. The manifold connects to the cylinder bore using O10 x O6.5 PU tubing. While the cylinder itself is rated for 1.0 MPa, the practical operating range for this assembled valved unit is 0.15-0.8 MPa.
Delivering 2513 N of push force at 0.5 MPa and up to 4523 N at 0.9 MPa, this self-switching unit eliminates the need for remote plumbing. By default, the piston rod retracts when the coil is energised, but this can be reconfigured to extend-when-energised simply by repositioning the valve. The assembly operates at speeds of 30-800 mm/s and carries an IP65 protection rating.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X150-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X150-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X150-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×150 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X150-10A Is Used
Decentralized Automation
Perfect for large factory layouts where running individual valve tubing back to a central manifold is costly and complex.
High-Force Clamping
Provides up to 4523 N of push force at 0.9 MPa for securing heavy components during machining operations.
Space-Constrained Machinery
The built-in valve manifold saves valuable panel and machine envelope space in tight equipment designs.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X150-10A the Right Choice?
Choose this 80 mm bore SAIF model when your application requires high thrust in a compact footprint without the tubing runs of a separate valve. If you need less force, stepping down to the 63 mm bore yields 1559 N of push at 0.5 MPa; conversely, moving up to the 100 mm bore provides 3927 N at the same pressure. The integrated 4M310 valve makes it ideal for decentralized stations across large machines, saving panel space and wiring. Remember that the 5/2 valve routes air but does not hold the load without live pressure, and the adjustable air cushions only decelerate the rod near stroke ends. For true position holding, consider an AirTAC SAIL lock cylinder.
When ordering a replacement, verify the 80 mm bore, 150 mm stroke, PT3/8 cylinder port, valve port code 10, AC220V voltage, terminal electrical entry, and standard carbon steel rod. Because this is a profile cylinder with an ISO 15552 mounting interface, it is dimensionally interchangeable with other ISO 15552 cylinders. Note that sensors require an -S magnet option to work with AirTAC CMSE reed or DMSE electronic switches.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X150-10A FAQ
The 80 mm bore cylinder delivers 2513 N of push force at 0.5 MPa and 4523 N at 0.9 MPa. The integrated 4M310-10 valve has an effective area of 30.0 mm2 (Cv 1.68).
No separate remote valve is needed; one AC220V coil signal drives the cylinder. The factory setting retracts the rod when energised, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X150-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.