Airtac SAIF Series Standard Cylinder with Valve SAIF80X160S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X160S-10A is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 160mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke160 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X160S-10A
The AirTAC SAIF80X160S-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This built-in valve delivers a 30.0 mm2 effective area (Cv 1.68) and mounts directly via a manifold block using O10 x O6.5 PU tubing. Driven by an AC220V terminal entry coil consuming 3.5 VA, it achieves IP65 protection and a 0.05 s response time. The -S magnet option enables position detection with CMSE reed or DMSE electronic sensors.
While the bare cylinder rates to 1.0 MPa, the practical operating range for this valved assembly is 0.15-0.8 MPa. It delivers 2513 N of push force at 0.5 MPa. By default, the factory setting retracts the piston rod when the coil is energised, but you can reconfigure it to extend-when-energised by repositioning the valve. This self-switching design eliminates remote plumbing, saving panel space for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X160S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X160S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X160S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×160 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X160S-10A Is Used
Decentralized Automation Stations
Ideal for large machines where running valve tubing is costly, this AC220V self-valved unit operates independently from a single terminal coil signal.
High-Force Clamping Jigs
Delivers 2513 N of push force at 0.5 MPa for secure holding, with integrated CMSE/DMSE sensor tracking via the -S magnet.
Space-Constrained Machinery
Eliminates the need for a separate 4M310 valve panel, saving valuable envelope space while providing a 30.0 mm2 flow area.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X160S-10A the Right Choice?
Choose this 80 mm bore when 50 mm (982 N push at 0.5 MPa) is insufficient, but a 100 mm bore (3927 N) is excessive. The self-contained SAIF80X160S-10A beats a separate cylinder plus remote valve in space-tight machines by integrating the 4M310 valve directly on the profile barrel. It requires only a single AC220V terminal coil signal to operate, minimizing wiring across decentralized stations. Note that the 5/2 valve routes air but does not hold the load without live pressure; for true locking, consider the SAIL series. Ensure your replacement matches the 160 mm stroke, PT3/8 valve port, PT3/8 cylinder port, AC220V voltage, terminal entry, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X160S-10A FAQ
The 80 mm bore generates 2513 N push force at 0.5 MPa and 4523 N at 0.9 MPa. The built-in 4M310-10 5/2 valve provides a 30.0 mm2 effective area (Cv 1.68) with a max frequency of 4 cycles/sec.
It has a built-in 4M310-10 valve driven by an AC220V terminal coil. By default, the rod retracts when energised, but you can reposition the valve to extend-when-energised. It operates at 0.15-0.8 MPa and requires no remote plumbing.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X160S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.