Airtac SAIF Series Standard Cylinder with Valve SAIF80X175S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X175S-10A is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 175mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke175 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X175S-10A
The AirTAC SAIF80X175S-10A is a double-acting ISO 15552 profile cylinder with a built-in 4M310-10 5/2 solenoid valve, delivering a Cv of 1.68 and a 30 mm2 effective orifice. Driven by an AC220V terminal-entry coil drawing 3.5 VA, it switches itself from one electrical signal, eliminating remote plumbing. The assembly includes a magnet for CMSE reed and DMSE electronic sensors.
While the bare cylinder body rates to 1.0 MPa, the integrated valve operates at 0.15-0.8 MPa, establishing the practical working range for this valved unit. It generates 2513 N of push force at 0.5 MPa. The factory default retracts the carbon steel rod when energized, but you can reposition the valve to extend on signal. The manifold connects via O10 x O6.5 PU tubing, and the valve uses a 3/8" port, distinct from the cylinder's 3/8" port.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X175S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X175S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X175S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×175 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X175S-10A Is Used
Decentralized Assembly Lines
Ideal for large machines with multiple stations, using the built-in valve to eliminate long tubing runs and reduce panel space.
High-Force Clamping
Provides 2513 N of push force at 0.5 MPa for holding heavy workpieces during machining or welding processes.
Retrofit Automation
Drops into existing ISO 15552 mounts with a single AC220V electrical connection, simplifying upgrades where pneumatic plumbing is difficult.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X175S-10A the Right Choice?
Choose this 80 mm bore when you need substantial thrust—2513 N push at 0.5 MPa—without the 100 mm bore's 3927 N. If your application requires less force, the 63 mm bore offers 1559 N. This self-valved SAIF excels in decentralized stations where running separate valve tubing is costly, saving panel space. The AC220V terminal coil offers IP65 protection and a 0.05 s response time.
For load-holding, note the 5/2 valve routes air but does not lock the piston; consider SAIL for mechanical locking. When replacing, match the 80 mm bore, 175 mm stroke, 3/8" valve port, AC220V voltage, PT thread, terminal entry, and -S magnet. Because the stroke is under 300 mm, standard side-load concerns are minimal, but always ensure axial alignment to protect the carbon steel rod.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X175S-10A FAQ
The 80 mm bore generates 2513 N push and 2268 N pull force at 0.5 MPa. The integrated 4M310-10 valve has a 30 mm2 orifice with a Cv of 1.68, supporting a max frequency of 4 cycles per second.
Yes. The factory setting retracts the rod when the AC220V coil is energized, but you can reposition the valve to extend-when-energized. The 5/2 valve holds position via pilot pressure, not a spring, so it requires continuous air pressure.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X175S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.