Airtac SAIF Series Standard Cylinder with Valve SAIF80X200-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X200-10A is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 200mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke200 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X200-10A
The AirTAC SAIF80X200-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This specific build pairs a PT3/8 cylinder port with a 3/8 valve port, utilizing a PU tube (O10 x O6.5) to link the manifold block to the barrel. Driven by an AC220V terminal-entry coil drawing 3.5 VA, it achieves a 0.05s activation time while maintaining an IP65 rating. The 4M310 valve provides a 30.0 mm2 effective area (Cv 1.68) and handles up to 4 cycles per second.
Although the bare cylinder body rates to 1.0 MPa, the operating pressure of the assembled SAIF unit is 0.15-0.8 MPa because the internal pilot valve limits the working range. Out of the box, the factory setting retracts the carbon steel piston rod when the coil is energised; this behavior can be reconfigured to extend-when-energised simply by repositioning the valve. Generating 2513N of push force at 0.5 MPa, it switches itself from one electrical signal, eliminating the need for a separate remote valve and drastically reducing plumbing for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X200-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X200-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X200-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×200 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X200-10A Is Used
Decentralized Automation Cells
Ideal for large manufacturing lines where installing individual valves on each cylinder saves panel space and eliminates long runs of control tubing.
High-Force Material Handling
Provides robust 2513N push force at 0.5 MPa for lifting, shifting, or gating heavy workpieces directly at the workstation.
Space-Constrained Retrofits
Suits machinery upgrades where an existing cylinder lacks a local valve, offering a self-switching solution that minimizes mechanical rework.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X200-10A the Right Choice?
Select this 80mm bore when an application requires substantial thrust, such as the 2513N push or 2268N pull force available at 0.5 MPa. If your fixture demands less force, stepping down to a 63mm bore yields 1559N push at 0.5 MPa, whereas moving up to a 100mm bore provides 3927N. The self-valved architecture of the SAIF series is optimal for space-tight machines or retrofits where running air tubing back to a centralized valve island is costly, as it requires only a single electrical connection to operate.
When specifying this exact model, verify your requirements for an AC220V power supply, a terminal electrical connection, and PT tapered threading. Note that the integrated 5/2 valve routes air and the end cushions only decelerate the rod near stroke end; neither function serves as a mechanical lock. If your load requires true position holding without live air pressure, consider the AirTAC SAIL lock variant instead. Replacement parts must match the 80mm bore, 200mm stroke, 3/8 valve port, AC220V voltage, terminal entry, and standard carbon steel rod.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X200-10A FAQ
At 0.5 MPa operating pressure, this 80mm bore cylinder generates 2513N of push force and 2268N of pull force. The integrated 4M310-10 valve features a 3/8 port, providing an effective flow area of 30.0 mm2 (Cv 1.68) with a maximum cycling frequency of 4 cycles per second.
No, the SAIF80X200-10A has a built-in 4M310 5/2 valve mounted directly on a manifold block, so it switches itself using a single AC220V terminal-entry coil signal. By default, the factory setting retracts the rod when energised, but this can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X200-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.