Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10A is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 200mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke200 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10A
The AirTAC SAIF80X200S-10A is a double-acting ISO 15552 profile cylinder with a built-in 4M310-10 5/2 solenoid valve. Driven by an AC220V terminal coil drawing 3.5 VA, it delivers a Cv of 1.68 and a push force of 2513N at 0.5 MPa. The integrated manifold uses O10 x O6.5 PU tubing to bridge the valve block to the PT3/8 cylinder ports, eliminating the need for a separate remote valve and drastically reducing panel space and plumbing in decentralized machine layouts.
While the bare cylinder body rates to 1.0 MPa, the practical operating range for this valved assembly is 0.15-0.8 MPa. From the factory, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised if your sequence requires it. This -S variant includes a magnet for CMSE reed and DMSE electronic sensors, and its carbon steel rod handles heavy loads without live pressure holding (the 5/2 valve routes air but is not a lock).
Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×200 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10A Is Used
Decentralized Automation
Ideal for large machines with multiple stations, as the built-in 4M310 valve eliminates long tubing runs back to a central control panel.
High-Force Clamping
Delivers 2513N of push force at 0.5 MPa, suitable for securing heavy workpieces during machining or welding operations.
Space-Constrained Retrofits
Easily upgrade older machines where panel space is limited, using the AC220V terminal connection to drive the cylinder directly.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10A the Right Choice?
Choose this 80mm bore when you need high thrust (2513N push at 0.5 MPa) and want to skip a remote valve island. If your application requires less force, stepping down to a 63mm bore yields 1559N push at 0.5 MPa; stepping up to 100mm provides 3927N. The 4M310-10 valve offers a 30.0 mm2 orifice, making it ideal for moving larger masses quickly. Because this self-switching unit requires only a single electrical signal to operate, it is perfect for space-tight machines where running pneumatic tubing back to a central panel is costly or impractical.
For replacements, verify the 200mm stroke, PT3/8 cylinder port, 3/8" valve port, AC220V terminal coil, PT threading, and the -S magnet. The carbon steel rod is standard. At 200mm stroke, side loads are minimal, but always ensure proper guide alignment to prevent premature seal wear. Note that for load-holding applications requiring a physical lock, consider the SAIL series instead.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10A FAQ
At an operating pressure of 0.5 MPa, this 80mm bore cylinder provides a push force of 2513N and a pull force of 2268N. The practical operating pressure range is 0.15-0.8 MPa.
No, the integrated 4M310-10 5/2 solenoid valve is internally piloted and switches the cylinder directly from the AC220V coil signal. By default, the rod retracts when energised, but it can be reconfigured to extend when energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.