Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10B is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 200mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke200 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10B
The AirTAC SAIF80X200S-10B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This built-in valve provides an effective area of 30.0 mm2 (Cv 1.68) and operates at a maximum frequency of 4 cycles per second. Equipped with a DC24V terminal coil consuming 3.0 W, it offers IP65 protection and a rapid 0.05 s activation time. The -S magnet enables position detection with AirTAC CMSE reed and DMSE electronic sensors.
While the cylinder body is rated for 1.0 MPa, the integrated valve limits the practical operating pressure to 0.15-0.8 MPa, delivering 2513 N of push force at 0.5 MPa. The manifold connects to the cylinder using O10 x O6.5 PU tubing. By default, the piston rod retracts when the coil is energised, but this can be reconfigured to extend-when-energised by repositioning the valve. This self-contained design eliminates remote plumbing, saving panel space for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×200 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10B Is Used
Decentralized Automation
Ideal for large machines with distributed stations, eliminating long runs of valve tubing by controlling the cylinder directly at the point of action.
High-Force Clamping
Provides 2513 N of push force at 0.5 MPa for securing heavy workpieces during machining or welding processes.
Compact Machine Retrofits
Saves panel space during upgrades where adding a separate valve island is impractical, using the built-in 4M310 valve instead.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10B the Right Choice?
Choose this 80mm bore if your application requires substantial thrust, such as the 2513 N push force at 0.5 MPa. If you need less force, stepping down to a 63mm bore yields 1559 N push at 0.5 MPa. The integrated 4M310-10 valve handles 3/8" porting, making it ideal for high-flow actuation without routing separate valve tubing. The carbon steel rod and PT tapered threads are standard. For load-holding applications, note that the 5/2 valve routes air but does not lock the load; consider an AirTAC SAIL lock cylinder for positive holding. When replacing, match the 200mm stroke, 3/8" valve port, DC24V terminal coil, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10B FAQ
The 80mm bore generates a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N.
Yes. The factory setting retracts the rod when the DC24V coil is energised, but you can reconfigure it to extend-when-energised by repositioning the 4M310 5/2 valve on the manifold block.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X200S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.