Airtac SAIF Series Standard Cylinder with Valve SAIF80X600-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X600-10A is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 600mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke600 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X600-10A
The AirTAC SAIF80X600-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. Driven by an AC220V terminal coil drawing 3.5 VA, the valve provides a 30.0 mm2 orifice (Cv 1.68) and switches up to 4 cycles per second with a 0.05 s response time. Because the manifold uses O10 x O6.5 PU tubing to bridge the cylinder and valve, the 3/8" valve port and 3/8" cylinder port are kept distinct. This assembly delivers 2513 N of push force at 0.5 MPa, with a carbon steel piston rod.
Although the bare cylinder rates to 1.0 MPa, the practical operating pressure for the valved SAIF unit is 0.15-0.8 MPa. By default, the piston rod retracts when the coil is energised, but you can reconfigure it to extend-when-energised simply by repositioning the valve. This self-switching design eliminates the need for a remote valve bank, saving panel space and making it ideal for decentralized stations across large machines.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X600-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X600-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X600-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×600 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X600-10A Is Used
Decentralized Automation
Perfect for large-scale production lines where running individual valve tubing back to a main panel is costly. The built-in 4M310 valve lets this 80 mm bore actuator operate independently from a single AC220V signal.
Heavy Material Handling
Provides 2513 N of push force at 0.5 MPa for diverting or lifting heavy pallets on a 600 mm stroke, while the self-contained valve minimizes exposed tubing that could be damaged in transit areas.
Machine Retrofitting
Ideal for upgrading existing ISO 15552 compatible machinery. The terminal entry and PT threaded ports simplify electrical and pneumatic connections when space for a separate valve island is unavailable.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X600-10A the Right Choice?
Choose this 80 mm bore when you need substantial thrust: it provides 2513 N push and 2268 N pull at 0.5 MPa. If your application requires less force, stepping down to the 63 mm bore yields 1559 N push at 0.5 MPa; stepping up to the 100 mm bore provides 3927 N. The integrated 4M310-10 valve handles its own air routing, meaning you only need to wire a single AC220V terminal connection rather than plumbing long tube runs back to a central manifold. Note that this 5/2 valve routes air but does not lock the load; for position holding without live pressure, consider the SAIL lock variant. Furthermore, the air cushion only decelerates the piston near the stroke ends.
When replacing this unit, verify the 600 mm stroke, 3/8" PT cylinder port, 3/8" valve port, AC220V voltage, terminal electrical entry, and standard carbon steel rod. As this is a 600 mm stroke, ensure adequate guiding to prevent side-loading damage to the extruded aluminum profile barrel.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X600-10A FAQ
At 0.5 MPa, this 80 mm bore cylinder generates 2513 N of push force and 2268 N of pull force. The integrated 4M310-10 5/2 solenoid valve has an effective area of 30.0 mm2 (Cv 1.68) and supports a maximum frequency of 4 cycles per second.
No separate remote valve is needed; the integrated 4M310 valve switches the cylinder directly from the AC220V coil signal. The factory setting retracts the rod when energised, but you can reconfigure it to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X600-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.