Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10A is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 600mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke600 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10A
The AirTAC SAIF80X600S-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This specific SKU is configured with a PT3/8 cylinder port, a 3/8 valve port, and an AC220V terminal electrical entry drawing 3.5 VA. The built-in valve provides an effective area of 30.0 mm2 (Cv 1.68) and handles up to 4 cycles per second. Because the manifold block routes air internally via PU tubing (O10 x O6.5), you save panel space by eliminating remote plumbing. The unit includes a magnet for CMSE reed and DMSE electronic sensors.
Although the bare cylinder body is rated for 1.0 MPa, the practical operating pressure for this valved assembly is 0.15-0.8 MPa, matching the valve limits. In its factory setting, the piston rod retracts when the coil is energised, but this can be reconfigured to extend-when-energised simply by repositioning the valve. At 0.5 MPa it delivers 2513 N of push force and 2268 N of pull force, reaching 3518 N push at 0.7 MPa.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×600 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10A Is Used
Decentralized Automation Lines
Eliminates the need for a central valve island on large machines. The built-in 4M310 valve allows this 80mm bore cylinder to operate independently via a single AC220V wire.
Long-Stroke Material Handling
The 600mm stroke and 2513 N push force at 0.5 MPa suit heavy diverter or gating tasks on conveyors, while the adjustable cushion absorbs end-of-stroke impact.
Space-Constrained Retrofits
Ideal for upgrading older pneumatic setups where adding external valve plumbing is difficult. The self-contained PT3/8 manifold block saves significant mounting space.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10A the Right Choice?
Choose this 80mm bore when a 63mm cylinder lacks thrust (the 63mm bore yields 1559 N push at 0.5 MPa) or when a 100mm unit is excessive (delivering 3927 N at 0.5 MPa). The 600mm stroke requires attention to side loads; always use a guide rail to prevent rod bending and premature seal wear. The integrated 4M310 valve means a single AC220V terminal connection drives the actuator, making it highly effective for decentralized stations across large machines where running individual valve tubing is costly. Remember that the 5/2 valve routes air but does not lock the load mechanically; if you need true position holding under zero pressure, consider the SAIL lock variant.
To replace this unit, match the 80mm bore, 600mm stroke, PT3/8 cylinder port, 3/8 valve port, AC220V voltage, terminal entry, PT thread type, and the -S magnet requirement. The carbon steel rod and adjustable air cushions (36mm stroke) handle the kinetic energy of this long stroke. Operating speed ranges from 30-800 mm/s.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10A FAQ
At 0.5 MPa, this 80mm bore cylinder generates 2513 N of push force and 2268 N of pull force. The integrated 4M310-10 valve has a 3/8 port, a 30.0 mm2 effective area (Cv 1.68), and operates at up to 4 cycles per second.
It uses a 5/2 solenoid valve that holds position via internal pilot pressure, not a spring. The factory default retracts the rod when the AC220V coil (3.5 VA, IP65, 0.05s response) is energised, but you can reposition the valve to extend-when-energised. No separate remote valve is needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.