Airtac SAIF Series Standard Cylinder with Valve SAIF80X700-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X700-10A is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 700mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke700 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X700-10A
The AirTAC SAIF80X700-10A is a double-acting ISO 15552 profile cylinder with a built-in 4M310-10 5/2 solenoid valve, delivering a Cv of 1.68 and a 30 mm2 effective orifice. Driven by an AC220V terminal coil drawing 3.5 VA, it activates in 0.05 s. The integrated manifold uses O10 x O6.5 PU tubing to bridge the valve and cylinder. Because the 4M310 valve operates at 0.15-0.8 MPa, the practical working pressure of this assembled unit is 0.15-0.8 MPa, even though the bare cylinder rates to 1.0 MPa. It generates 2513N of push force at 0.5 MPa and 4523N at 0.9 MPa.
By default, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised. This self-switching design eliminates the need for a separate remote valve, reducing panel space and tubing runs for decentralized machine stations. The 5/2 valve holds its position via internal pilot pressure, not a spring. For load-holding requirements, explore the SAIL lock series instead.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X700-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X700-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X700-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×700 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X700-10A Is Used
Decentralized Automation
Ideal for large factory layouts where running individual valve tubing back to a central manifold is costly and complex.
High-Force Clamping
Delivers 4523N of push force at 0.9 MPa for securing heavy workpieces during machining operations.
Space-Constrained Retrofit
Fits directly into tight machine envelopes by eliminating the need for an external valve bank and extra fittings.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X700-10A the Right Choice?
Choose this 80mm bore when you need high thrust that a 63mm bore (1559N push at 0.5 MPa) cannot provide, but a 100mm bore (3927N at 0.5 MPa) is oversized. The 700mm stroke is well within the 1500mm standard maximum for this bore. Because the stroke is 700mm, ensure adequate guide support to prevent excessive side loading on the rod. Select this self-valved SAIF unit over a separate cylinder and remote valve when decentralizing stations across a large machine, as it slashes plumbing and wiring. To replace this model exactly, match the 80mm bore, 700mm stroke, 3/8" valve port code 10, AC220V terminal coil, PT thread, and no magnet (-S).
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X700-10A FAQ
The 80mm bore generates 2513N push and 2268N pull force at 0.5 MPa, reaching 4523N push at 0.9 MPa. The built-in 4M310-10 valve provides a 30 mm2 effective area (Cv 1.68) with a max frequency of 4 cycles/sec.
It uses a 4M310 5/2 solenoid valve. By default, the rod retracts when the coil is energised, but it can be reconfigured to extend-when-energised by repositioning the valve. This unit uses an AC220V terminal coil (3.5 VA, IP65), and no separate remote valve is needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X700-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.