Airtac SAIF Series Standard Cylinder with Valve SAIF80X80-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X80-10B is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 80mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke80 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X80-10B
The AirTAC SAIF80X80-10B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This specific configuration pairs an 80mm bore delivering 2513N of push force at 0.5MPa with a DC24V terminal entry coil consuming 3.0W. The built-in valve offers an effective area of 30.0mm2 (Cv 1.68) and operates at up to 4 cycles per second, activating in 0.05s or less under IP65 protection.
Because the manifold routes air directly via a PU tube (O10 x O6.5), the assembly requires no remote valve panel, saving significant space and plumbing in decentralized machine layouts. While the cylinder body rates to 1.0MPa, the practical working pressure for the valved unit is 0.15-0.8MPa. Factory set to retract the rod when the coil is energised, the valve can be repositioned to extend-when-energised if your sequence demands it.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X80-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X80-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X80-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×80 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X80-10B Is Used
Decentralized Assembly Lines
Eliminates remote valve banks by self-switching the 80mm bore directly at the station, cutting tubing runs and panel footprint.
High-Force Clamping Stations
Provides 2513N of push force at 0.5MPa for securing heavy workpieces, driven by a fast 4M310-10 valve with a 0.05s response.
Retrofit Machinery
Ideal for upgrading older machines where adding centralized pneumatic logic is difficult, using a single DC24V terminal signal.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X80-10B the Right Choice?
Choose this 80mm bore when a 63mm cylinder (1402N pull at 0.5MPa) lacks thrust, but a 100mm unit is physically oversized. The self-contained SAIF80X80-10B is ideal for decentralized stations where running separate valve tubing is costly, as one DC24V terminal signal drives the entire actuator. If your process loses pressure, the 5/2 valve will not hold the load; for true position locking, select the SAIL lock or BSAI clamp-lock variant instead. When ordering a replacement, confirm the 80mm stroke, PT3/8 cylinder port, 10 (3/8) valve port, DC24V voltage, terminal entry, and the absence of a magnet (-S).
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X80-10B FAQ
At 0.5MPa, the 80mm bore generates 2513N of push force and 2268N of pull force. The integrated 4M310-10 valve has a 30.0mm2 orifice with a Cv of 1.68.
Yes. The factory setting retracts the rod when the DC24V coil is energised, but you can reposition the 5/2 valve to extend-when-energised. No separate remote valve is needed.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X80-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.