Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-10S
The AirTAC Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 130mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke130 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-10S
The AirTAC SAIJ100X130-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 120 to 130 mm for fine-tuning the retract end position during commissioning. It delivers robust thrust, pushing 3927 N and pulling 3681 N at 0.5 MPa, making it suitable for heavy actuation tasks. The extruded aluminum barrel features sensor grooves on both sides, and with the included magnet (-S), it integrates seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches for precise position feedback.
This variant features a SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance compared to standard carbon steel. The rear adjustment screw acts purely as a mechanical stop to set the travel limit; it does not lock or hold the load without continuous live air pressure. For position-holding requirements without pneumatic pressure, an external rod lock or related series like SAIL or BSAI should be utilized.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-10S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-10S Is Used
Machine Setup Changeover
Dial in the exact retract distance within a 120-130 mm window during product line changeovers without adding external stopper blocks.
Heavy Clamping Force
Leverage 3927 N of push force at 0.5 MPa to secure heavy workpieces while using the adjuster to set the precise clamping depth.
Automated Forming Press
Adjust the end-stop on the fly to accommodate varying material thicknesses in a forming or stamping station.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-10S the Right Cylinder?
Choose this 100 mm bore cylinder when your application requires high force (3927 N push at 0.5 MPa) alongside precise end-position tuning; if your load demands less force, stepping down to an 80 mm bore yields 2513 N push at 0.5 MPa. The adjustable-stroke mechanism is ideal for machine setups requiring variable end-stops or product-size changeovers without swapping out the entire cylinder. When ordering, confirm the PT tapered port threads, the SUS420J2 rod material, and the -S magnet option to ensure compatibility with your CMSE or DMSE sensors.
Since this model has a 130 mm stroke, it does not require external guide rails for side-load management, though the robust 25 mm rod and M20x1.5 thread naturally handle standard bending stresses well. Remember that the SAIJ mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR variants found in some standard lines.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-10S FAQ
At an operating pressure of 0.5 MPa, this 100 mm bore cylinder provides a push force of 3927 N and a pull force of 3681 N. At 0.7 MPa, the push force increases to 5497 N.
The -10 code indicates the rear adjuster can trim the effective stroke by up to 10 mm, creating a usable travel window of 120 to 130 mm. The adjuster acts as a mechanical stop to fine-tune the end position and requires live air to hold the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.