Airtac SAIJ125 Adjustable Cylinder SAIJ125X60-10
The AirTAC Airtac SAIJ125 Adjustable Cylinder SAIJ125X60-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø125mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ125 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2
- CushionAdjustable, 40 mm
About the Airtac SAIJ125 Adjustable Cylinder SAIJ125X60-10
The AirTAC SAIJ125X60-10 is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers 6136N of push force at 0.5MPa, stepping up to 8590N at 0.7MPa. By integrating a 10mm adjustment screw, this model creates a precise 50-60mm usable travel window, allowing you to dial in the exact retract position without swapping hardware.
This extruded aluminum profile cylinder features a 32mm carbon steel rod with an M27x2 thread, built to handle high side loads. It uses PT tapered port threads (G1/2) and operates at speeds between 30-500mm/s. The rear adjuster acts purely as a travel stop for commissioning fine-tuning, meaning it will not hold a load without live air pressure.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X60-10 Technical Specifications
| Model | Airtac SAIJ125 Adjustable Cylinder SAIJ125X60-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ125 Adjustable Cylinder SAIJ125X60-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 125 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ125 Adjustable Cylinder SAIJ125X60-10 Is Used
Product Changeover
Quickly fine-tune the 50-60mm travel window during format changes on packaging lines without replacing the cylinder.
Heavy Clamping
Leverage 8590N of push force at 0.7MPa to secure heavy workpieces, using the rear stop to dial in the exact clamp position.
Machine Setup
Set precise retract end-stops during initial commissioning to prevent mechanical interference on large assemblies.
Is the Airtac SAIJ125 Adjustable Cylinder SAIJ125X60-10 the Right Cylinder?
Choose this 125mm bore when a 100mm cylinder (providing 3927N push at 0.5MPa) lacks the thrust for heavy positioning tasks, but you want to avoid the larger 160mm class. The 10mm adjustable window is ideal for product-size changeovers on a line, letting you set variable end-stops on the fly instead of machining external stops.
When specifying a replacement, verify the 60mm stroke, 10mm adjustment range, G1/2 PT port, and your mounting choice from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). For load-holding without continuous air, select a SAIL or BSAI cylinder instead, as the SAIJ adjuster is not a locking mechanism.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X60-10 FAQ
It features a rear adjusting screw that lets you shorten the nominal 60mm stroke by up to 10mm, providing a usable travel window of 50-60mm to fine-tune the end position at commissioning.
At 0.5MPa it provides 6136N of push force and 5734N of pull force. At 0.7MPa, the push force increases to 8590N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ125 Adjustable Cylinder SAIJ125X60-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.