Airtac SAIJ160 Adjustable Cylinder SAIJ160BX35-10
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160BX35-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 35mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke35 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX35-10
The AirTAC SAIJ160X35-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel window down to 25-35 mm from its 35 mm nominal stroke. Delivering 9425 N of pull force at 0.5 MPa, this large-bore actuator is built with a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered ports. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily mount CMSE reed or DMSE electronic sensors if position feedback is later required.
Because the rear adjuster acts strictly as a mechanical stop, it sets the retract end position without needing external bumpers or cylinder swaps during machine changeover. It is important to note that this stopper and the standard air cushions decelerate the load but do not hold it; for true load-holding without live air pressure, a SAIL pneumatic lock or BSAI clamp-lock cylinder is required. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX35-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX35-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX35-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX35-10 Is Used
Heavy Clamping Positioning
Fine-tune the exact clamping depth on heavy machining fixtures by adjusting the stroke window from 35 mm down to 25 mm without swapping the cylinder.
Product Changeover Stops
Quickly adapt retract end-stops on a production line processing different product heights by turning the rear adjuster screw during format changes.
Short-Stroke Pressing
Execute high-force pressing or forming tasks where the 160 mm bore provides the necessary power and the rear stopper guarantees precise bottoming out.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX35-10 the Right Cylinder?
Choose this 160 mm bore model when you need heavy thrust (up to 10053 N push at 0.5 MPa) in a very short, adjustable stroke. If your application requires slightly less force and a smaller footprint, stepping down to a 125 mm bore yields 5734 N pull at 0.5 MPa. The 10 mm adjustment range on this SKU is perfect for dialing in exact end-of-stroke positions at commissioning without adding external stops, unlike a fixed-stroke SAI cylinder. When specifying your ISO 15552 replacement, verify the 160 mm bore, 35 mm stroke, 10 mm adjustment, PT ports, and standard rod (no -S magnet). Although the stroke is short, the 40 mm rod diameter handles high side loads well, but always guide the load externally to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX35-10 FAQ
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke by up to 10 mm. This provides a usable travel window of 25-35 mm, enabling fine-tuning of the end position at commissioning without external stops.
At an operating pressure of 0.5 MPa, the SAIJ160X35-10 generates 10053 N of push force and 9425 N of pull force. It can deliver a maximum thrust of 2050 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX35-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.