Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 110mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke110 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10
The AirTAC SAIJ200X110-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 100 to 110 mm usable travel window, allowing you to dial back the stroke by up to 10 mm during commissioning without adding external stops. Built with a 200 mm bore, it delivers 15708 N of push force at 0.5 MPa, making it suitable for heavy-duty positioning tasks.
This unit uses a SUS420J2 stainless steel rod and PT tapered ports. The rear adjuster acts strictly as a travel stop to fine-tune end positions and does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10 Is Used
Heavy Press Tuning
Fine-tune the 100-110 mm travel window on heavy presses to avoid mechanical interference during setup.
Product Changeover
Quickly adjust the rear stopper by up to 10 mm to accommodate new product sizes on a high-force line.
End-Stop Calibration
Dial in the exact retracted position on heavy machinery without swapping out the entire cylinder.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10 the Right Cylinder?
Choose this 200 mm bore model when your application requires substantial thrust, such as 15708 N at 0.5 MPa, combined with a short 110 mm stroke that needs exact end-position tuning. If you need less force, stepping down to a 160 mm bore yields 10053 N at 0.5 MPa, whereas moving up is not possible as this is the largest standard size. The 10 mm adjustment window is ideal for variable end stops during product changeovers. When replacing an ISO 15552 cylinder, match the 200 mm bore, 110 mm stroke, PT port threads, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). This unit lacks a magnet, so it cannot host CMSE or DMSE sensors without a -S suffix model.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10 FAQ
At 0.5 MPa operating pressure, this 200 mm bore cylinder provides 15708 N of push force and 15080 N of pull force. It can reach up to 21991 N push force at 0.7 MPa.
The rear adjuster screw lets you shorten the 110 mm nominal stroke by up to 10 mm, creating a 100-110 mm travel window. It acts as a mechanical stop and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.