Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-100S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 110mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke110 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-100S
The AirTAC SAIJ200X110-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a massive 15708N push force at 0.5 MPa and a usable travel window of 10-110mm, letting you dial back the nominal 110mm stroke by up to 100mm during machine commissioning. This extreme adjustability eliminates the need to swap cylinders or bolt on external stops when tuning end positions.
Built for demanding environments, this unit uses a SUS420J2 stainless steel rod for superior corrosion resistance and includes a magnet for CMSE and DMSE sensors. It operates at 30-500mm/s, uses PT G3/4 tapered ports, and relies on 50mm air cushions at both ends to decelerate heavy loads. The extruded aluminum barrel provides sensor grooves on both sides for flexible switch mounting.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-100S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-100S Is Used
Heavy Pressing
Provides up to 15708N of push force for heavy assembly operations, with the 100mm adjuster allowing precise tuning of the pressing depth without changing tooling.
Product Changeover
Quickly adapt the travel window from 10 to 110mm on a production line when switching between different product sizes, saving downtime on mechanical reconfigurations.
Large Fixture Clamping
Secures heavy industrial fixtures with 15080N of pull force, using the SUS420J2 stainless rod to resist corrosion in humid manufacturing environments.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-100S the Right Cylinder?
Select this 200mm bore cylinder when an application requires extreme thrust, such as 15708N push or 15080N pull at 0.5 MPa, alongside highly variable end-stops. If you need less force, stepping down to a 160mm bore yields 10053N push, but the 200mm bore is necessary for heavy pressing or holding tasks. The -S magnet allows precise position detection with CMSE reed or DMSE electronic switches.
Because the nominal 110mm stroke is relatively short but the adjustment range is massive, you can fine-tune the travel anywhere from 10 to 110mm without changing the mounting footprint. Remember that the rear adjuster is a travel stop, not a lock; this SAIJ cylinder cannot hold a load without live air. For true fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder. When matching ISO 15552 dimensions, specify the 200mm bore, 110mm stroke, 100mm adjust, PT G3/4 port, and -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-100S FAQ
The rear adjuster screw acts as an external stopper, allowing you to shorten the effective stroke from 110mm down to as little as 10mm. This provides a 10-110mm usable travel window for fine-tuning end positions without swapping the cylinder.
At 0.5 MPa operating pressure, it delivers 15708N of push force and 15080N of pull force. At the maximum 1.0 MPa pressure, the push force increases to 31416N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.