Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-75S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 110mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke110 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-75S
The AirTAC SAIJ200X110-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling a usable travel window of 35-110 mm from its 110 mm nominal stroke. In the 200 mm bore class, it delivers immense thrust, generating up to 28274N of push force at 0.9 MPa. This specific configuration includes a SUS420J2 stainless steel rod, a PT tapered port, and a magnet for position sensing.
Because the rear adjuster acts purely as a mechanical stop, it fine-tunes the retract end position during commissioning without requiring an external stop block. The adjuster and the integrated air cushions decelerate the load but do not hold it without live air; for fail-safe load holding, consider the SAIL or BSAI series. This model uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable per ISO 15552.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-75S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-75S Is Used
Heavy Press Fit Operations
Provides up to 28274N of precise push force at 0.9 MPa for seating large industrial components, with the 75 mm adjuster allowing exact depth tuning per part batch.
Variable End-Stop Setup
Ideal for production lines running mixed product sizes, enabling operators to dial back the stroke from 110 mm down to 35 mm during changeover without adding external mechanical stops.
Large-Scale Assembly Jigs
Handles heavy structural alignment tasks where the 40 mm SUS420J2 stainless rod resists corrosion while providing the rigid support needed for large-scale fabrication fixtures.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-75S the Right Cylinder?
Choose this 200 mm bore cylinder when your application demands maximum thrust, such as heavy press operations requiring up to 3204 kgf at 1.0 MPa. If you need less force, stepping down to a 160 mm bore yields 18095N of push force at 0.9 MPa, which might better suit medium-duty tasks. The 75 mm adjustment range is ideal for machine setups requiring frequent product-size changeovers, allowing you to dial in the exact end position without swapping cylinders.
When replacing an ISO 15552 cylinder, match the 200 mm bore, 110 mm nominal stroke, 75 mm adjustment range, PT port thread, and the -S magnet option. The 40 mm piston rod and M36x2 thread provide exceptional rigidity, but for any stroke of 300 mm or more, you must use an external guide to prevent excessive side-loading. Position detection is handled by CMSE reed or DMSE electronic sensors fitted into the dual-side sensor grooves.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-75S FAQ
At an operating pressure of 0.9 MPa, this 200 mm bore cylinder generates a push force of 28274N and a pull force of 15080N. At the maximum rated pressure of 1.0 MPa, it can deliver up to 3204 kgf.
The rear external adjuster allows you to mechanically shorten the effective stroke by up to 75 mm, providing a usable travel window between 35 mm and 110 mm. This stopper fine-tunes the end position at commissioning but does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.