Airtac SAIJ200 Adjustable Cylinder SAIJ200AX200-10S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200AX200-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 200mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke200 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX200-10S
The AirTAC SAIJ200X200-10-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 190-200mm usable travel window by allowing you to dial back the nominal 200mm stroke by up to 10mm. In the 200mm bore class, it generates a substantial 15708N of push force at 0.5MPa and 21991N at 0.7MPa.
This unit features a SUS420J2 stainless steel rod (option A) for improved corrosion resistance and includes a built-in magnet (-S) for use with AirTAC CMSE reed and DMSE solid-state sensors. The extruded aluminum barrel includes sensor grooves on both sides, and the rear adjuster acts purely as a travel stop to fine-tune end positions at commissioning without needing external stops.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX200-10S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200AX200-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200AX200-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX200-10S Is Used
Heavy Pressing Operations
Dial in the exact 190-200mm end position for high-force pressing tasks, ensuring perfect contact without over-stroking the tooling.
Machine Changeovers
Quickly adapt the retract stop point up to 10mm during product size changes on the line, minimizing setup time and avoiding cylinder swaps.
Large Assembly Stations
Leverage the 15708N push force at 0.5MPa for heavy-duty assembly jigs, using the rear screw to fine-tune the final clamping position.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX200-10S the Right Cylinder?
Choose this 200mm bore when your application requires maximum thrust, stepping up from a 160mm bore that provides 10053N push at 0.5MPa. The 10mm adjustable window is ideal for product changeovers or fine-tuning the retract end position without swapping the cylinder. For load-holding without live air pressure, note that this rear adjuster is a stop, not a lock; you would need an SAIL or BSAI cylinder instead. To match this ISO 15552 interchangeable cylinder exactly, specify: 200mm bore, 200mm stroke, 10mm adjustment, PT tapered ports, and the -S magnet. With a 200mm stroke, the 40mm rod diameter handles high side loads, but long unsupported travel still requires an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX200-10S FAQ
At 0.5MPa operating pressure, this 200mm bore cylinder provides 15708N of push force and 15080N of pull force. At 0.7MPa, the push force increases to 21991N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from the nominal 200mm down to 190mm. This creates a 10mm adjustable window for fine-tuning the end position at commissioning without adding external stops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200AX200-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.