Airtac SAIJ200 Adjustable Cylinder SAIJ200BX1000-10S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200BX1000-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 1000mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke1000 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX1000-10S
The AirTAC SAIJ200X1000-10-S is a double-acting ISO 15552 profile cylinder engineered for heavy-duty applications, delivering a massive 28274N of push force at 0.9 MPa. Equipped with a SUS304 stainless steel rod and a -S magnet, it integrates seamlessly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. This made-to-order 1000mm stroke unit provides a finely tunable 990-1000mm travel window via its rear adjuster.
Rather than relying on external stops, the integrated rear screw allows you to dial in the exact end position during commissioning. The extruded aluminum barrel features sensor grooves on both sides, and the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets. Note that the adjuster acts strictly as a travel stop, not a load lock; for position holding without live air, consider an external rod lock or the SAIL series.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX1000-10S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200BX1000-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200BX1000-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX1000-10S Is Used
Heavy Stamping Alignment
Fine-tune the 990-1000mm travel window during heavy stamping setups to perfectly position large dies without adding external mechanical stops.
Oversized Payload Diversion
Leverage the 28274N push force to divert heavy pallets or oversized materials on a conveyor, adjusting the end stop precisely for varying load depths.
Large Assembly Pressing
Apply consistent 0.9 MPa pressing force for large component assembly, using the rear adjuster to compensate for minor fixture height differences.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX1000-10S the Right Cylinder?
Selecting this 200mm bore cylinder is appropriate when your process demands up to 15708N of push force at 0.5 MPa, stepping up significantly from a 160mm bore which provides 10053N. The adjustable stroke is ideal for fine-tuning the retraction point on product changeovers without swapping the cylinder. Because this unit features a 1000mm stroke, an external guide is strongly recommended to manage side loads and prevent rod binding over such a long unsupported distance.
For a direct ISO 15552 replacement match, verify the 200mm bore, 1000mm stroke, PT tapered port threads, and the -S magnet requirement. The G3/4 port size handles the substantial air volume needed for the 30-500mm/s operating speed range of this large-bore actuator.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX1000-10S FAQ
At an operating pressure of 0.9 MPa, this 200mm bore cylinder provides a push force of 28274N and a pull force of 25632N. It reaches a maximum push force of 3204 kgf at 1.0 MPa.
The rear adjuster allows you to shorten the effective stroke by up to 10mm, creating a usable travel window of 990-1000mm. This stopper fine-tunes the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200BX1000-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.