Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X700-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 700mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke700 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100
The AirTAC SAIJ200X700-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 600 to 700 mm, letting you dial back the end position by up to 100 mm during commissioning without swapping hardware. Built with a 200 mm bore, it delivers massive thrust up to 28274 N at 0.9 MPa.
This heavy-duty actuator uses a G3/4 PT tapered port and a 40 mm carbon steel rod with an M36x2 thread. The extruded aluminum barrel includes sensor grooves on both sides. The rear adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100 Is Used
Heavy Press Tuning
Fine-tune the 600-700 mm travel window on large stamping presses to accommodate varying material thicknesses without adding external mechanical stops.
Automated Line Changeover
Rapidly adjust the end-of-stroke position during product size changeovers on high-force assembly lines, saving setup time.
Fixture Positioning
Dial in the exact clamping reach on massive fabrication fixtures, using the 100 mm rear stopper to perfect the end position.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100 the Right Cylinder?
If you need less thrust, stepping down to a 160 mm bore provides 10053 N at the same pressure. The 100 mm adjustment range is ideal for product changeovers on large machines, allowing variable end-stops instead of fixed SAI cylinder travel.
Because the 700 mm stroke is substantial, an external guide is recommended to manage side loads on the extended 40 mm rod. For load-holding without live pressure, this cylinder is not a lock; consider an AirTAC SAIL or BSAI model. ISO 15552 replacement match: 200 mm bore, 700 mm stroke, 100 mm adjust, G3/4 PT port, Basic/LB/TC mounting, no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100 FAQ
It can deliver a maximum of 3204 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the 700 mm nominal stroke down to 600 mm. This creates a 600-700 mm usable window for fine-tuning end positions without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.