Airtac SAIJ200 Adjustable Cylinder SAIJ200X80-10
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X80-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 80mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke80 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X80-10
The AirTAC SAIJ200X80-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 80 mm stroke with a 10 mm adjustment range, creating a precise 70-80 mm usable travel window for fine-tuning end positions during commissioning.
The extruded aluminum barrel features sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. It utilizes a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. The rear adjuster acts purely as a travel stop to decelerate the piston, not as a load-holding lock; for position holding without live air pressure, an external rod lock or SAIL cylinder is required.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X80-10 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X80-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X80-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X80-10 Is Used
Heavy Press Tuning
Dial in the exact 70-80 mm travel window during heavy press setup to accommodate material thickness variations without changing the cylinder.
Machine Changeover
Quickly adjust the retract end-stop by up to 10 mm during production line changeovers to handle slightly different product dimensions.
Heavy-Duty Clamping
Apply up to 15708 N of clamping force at 0.5 MPa while using the rear screw to fine-tune the exact clamping position.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X80-10 the Right Cylinder?
Selecting this 200 mm bore model is appropriate when an application demands exceptionally high force (up to 15708 N at 0.5 MPa) alongside minor end-position tweaking. If the 10 mm adjustment window is insufficient for product changeover, stepping up to a larger adjuster code like SAIJ200X80-50 provides a wider 30-80 mm range.
Because the 80 mm stroke is relatively short for this large bore, side-load risks are minimized, but the substantial 40 mm rod thread handles high bending stresses well. To replace an ISO 15552 cylinder, match the 200 mm bore, 80 mm stroke, 10 mm adjustment, G3/4 PT port, and the required mounting bracket. Note that without the -S magnet option, this specific configuration cannot host pneumatic end-of-stroke sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X80-10 FAQ
It features a rear adjusting screw that acts as a physical stop, allowing you to shorten the 80 mm nominal stroke by up to 10 mm. This provides a usable travel window of 70-80 mm, which is set at commissioning without needing external stops.
It operates at a speed range of 30-500 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X80-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.