Airtac SAIJ200 Adjustable Cylinder SAIJ200X800-75S
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X800-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 800mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke800 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X800-75S
The AirTAC SAIJ200X800-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling a usable travel window of 725 to 800 mm. The extruded aluminum barrel features sensor grooves on both sides, and the -S magnet pairs directly with AirTAC CMSE reed and DMSE solid-state switches for precise end-of-stroke detection.
This variant uses a carbon steel piston rod with an M36x2 thread and a PT tapered port. The rear adjuster functions purely as a travel stop to fine-tune the retract position, meaning it cannot hold a load without continuous live air pressure. For safety locking under zero pressure, a SAIL or BSAI variant would be required.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X800-75S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X800-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X800-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X800-75S Is Used
Large Product Changeover
Modify the retract distance on the fly to handle varying pallet or product sizes on a high-capacity conveyor line, using the rear screw to set the new zero position.
Industrial Machine Setup
Fine-tune the end-of-stroke position during initial commissioning of large-scale machinery, ensuring perfect alignment without adding external mechanical stops.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X800-75S the Right Cylinder?
An adjustable stroke is selected over a fixed SAI cylinder when a machine requires variable end-stops to accommodate product changeovers without physically swapping the cylinder body. To match this ISO 15552 replacement exactly, specify the 200 mm bore, 800 mm stroke, 75 mm adjustment, PT port thread, and the -S magnet.
Because the 800 mm stroke is substantial and the 40 mm rod is highly rigid, the cylinder can endure significant side loads, yet an external guide is still strongly recommended to prevent binding over such a long unsupported travel. The mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting FB, CA, CB, and CR.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X800-75S FAQ
At its maximum 1.0 MPa pressure, it can deliver up to 3204 kgf.
The rear adjuster screw acts as a travel stop that lets you shorten the effective stroke by up to 75 mm, creating a usable travel window of 725 to 800 mm. It only sets the end position and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X800-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.