
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X130-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 130mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X130-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to dial in the exact retract end-position at commissioning without swapping out the actuator or fabricating external stops.
Fitted with a PT tapered port and a 16mm carbon steel rod with an M12x1.25 thread, this bore size handles moderate loads effectively. The -S designation means it includes a magnet for position sensing, working seamlessly with AirTAC CMSE reed and DMSE electronic switches mounted in the dual-side sensor grooves. It utilizes variable air cushions at both ends to decelerate the load smoothly.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X130-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the 110-130mm travel window during line format changes to accommodate different packaging sizes without changing the cylinder.
Fine-tune the retract position during machine commissioning to achieve precise mechanical alignment without adding external shims.
Provides adjustable actuation distance for diverters or gates, allowing operators to modify the stroke based on varying product dimensions.
The adjustable stroke is ideal for machines requiring product changeovers, letting you reposition the retract end-stop on the fly. Remember that the rear adjuster functions strictly as a travel stop, not a lock—the cylinder will not hold a load without live air pressure. For true load-holding, consider an AirTAC SAIL or BSAI cylinder.
To match this ISO 15552 dimensionally interchangeable actuator, confirm your bore size, 130mm stroke, 20mm adjustment range, PT port thread, and required mounting bracket. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 options. Because the stroke is 130mm, ensure your mounting configuration adequately supports the rod to minimize side-loading.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 130mm nominal stroke by up to 20mm. This creates a usable travel window of 110-130mm, which can be fine-tuned during setup without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.