
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X165-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 165mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X165-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 165 mm stroke that can be fine-tuned backward by up to 40 mm, yielding a usable travel window of 125 to 165 mm.
This extruded aluminum profile cylinder features a 20 mm carbon steel piston rod and a PT tapered G1/4 port. The rear adjuster functions purely as a mechanical stop to set the retract distance and relies on the integrated air cushion for end-of-stroke deceleration; it does not lock or hold the load without continuous air pressure. Mounting options include the standard SAIJ set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X165-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 125 to 165 mm travel window on the fly when switching between product sizes on a packaging line, avoiding mechanical rebuilds.
Fine-tune the retract end-position during machine commissioning to achieve exact placement without fabricating custom external stoppers.
Select this 50 mm bore when an application requires precise 125 to 165 mm travel tuning during commissioning or product changeover, avoiding the need to physically swap cylinders or add external stopper blocks. If your setup needs less force, stepping down to a 40 mm bore yields 628 N at 0.5 MPa, while stepping up to a 63 mm bore provides 1559 N for heavier loads. Because this is a standard 165 mm stroke under the 1200 mm maximum, it ships as a stock configuration.
For a direct replacement, match the 50 mm bore, 165 mm stroke, 40 mm adjustment range, PT G1/4 port, and carbon steel rod. Note that the rear mechanical stopper only trims the travel distance. If the machine requires the load to be held securely without live air pressure, an AirTAC SAIL pneumatic lock cylinder or an external pilot-operated check valve is necessary. This model does not include a magnet, so position sensing requires specifying the -S option to use CMSE reed or DMSE electronic switches.
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 200 kgf.
The rear adjuster screw acts as a mechanical stop that trims the effective travel back from the 165 mm nominal stroke, providing a usable window of 125 to 165 mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.