
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X170-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 170mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X170-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 140-170 mm usable travel window, allowing you to dial back the 170 mm nominal stroke by up to 30 mm during commissioning.
This extruded aluminum barrel design includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches. The carbon steel rod features an M16x1.5 thread, and the standard PT tapered port is G1/4. The rear stopper sets the travel end-point, but it does not secure the load without continuous live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X170-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 140-170 mm retract position during machine setup without swapping cylinders or adding external mechanical stops.
Quickly adjust the stroke window on packaging lines when handling slightly different package sizes, saving retooling time.
Fine-tune the clamping travel on manufacturing fixtures where the exact end-position varies based on part tolerances.
If you need less force, the 40 mm bore offers 628 N; for heavier loads, the 63 mm bore provides 1559 N. Because the SAIJ50X170-30 uses an external screw rather than a locking mechanism, you must maintain live air to hold position—use an AirTAC SAIL or BSAI cylinder for true pneumatic locking.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 170 mm stroke, 30 mm adjustment, G1/4 PT port, and carbon steel rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, intentionally omitting FB, CA, CB, and CR brackets. Since the 170 mm stroke is under 300 mm, side-load concerns are moderate, but an external guide is still recommended for heavy lateral loads.
Quick checklist
If operated at 0.7 MPa, the push force increases to 1374 N.
The rear adjuster acts as a stopper that lets you shorten the effective stroke from 170 mm down to 140 mm. It sets the travel end and deceleration, but it is not a lock and cannot hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.