verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-40

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X175-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 175mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke175 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$96.27 $103.77Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-40

The AirTAC SAIJ50X175-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 135-175 mm usable travel window. The standard carbon steel rod uses an M16x1.5 thread, and the PT tapered port is G1/4.

This adjustable model lets you fine-tune the retract end position during commissioning or product changeover without swapping the cylinder or bolting on external stops. The rear adjuster acts purely as a travel stop to set the deceleration point alongside the variable air cushions; it does not hold the load without live air pressure. For applications requiring position holding without continuous pneumatic pressure, consider the SAIL or BSAI series instead.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-40 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X175-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke175 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-40

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×175Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-40 Is Used

tune

Product Changeover

Dial in the exact 135-175 mm end position for different package sizes on a packaging line without changing out the actuator.

settings_input_component

Machine Setup

Fine-tune the retract stop during commissioning to perfect the timing and stroke distance without adding external stopper blocks.

factory

Variable End Stops

Adjust the travel end-point on the fly for assembly stations that handle multiple part lengths within the 40 mm window.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-40 the Right Cylinder?

If your project demands less force, the 40 mm bore offers 628 N; for heavier loads, the 63 mm bore provides 1559 N. The 40 mm adjustment range on this 175 mm stroke is ideal for machinery requiring variable end-stops during product size changeovers. When matching this for an ISO 15552 replacement, verify the 175 mm stroke, 40 mm adjustment, G1/4 PT ports, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is under 300 mm, side-load risks are moderate, but the M16x1.5 rod still requires alignment to prevent premature seal wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-40 FAQ

At the maximum operating pressure of 1.0 MPa, it delivers up to 200 kgf.

The rear adjuster screw allows you to shorten the 175 mm nominal stroke by up to 40 mm, creating a 135-175 mm travel window. This stopper sets the end position but does not lock or hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X175-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.