
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X185-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 185mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X185-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 155-185 mm usable travel window by allowing you to trim the 185 mm nominal stroke back by up to 30 mm.
This extruded aluminum barrel design includes sensor grooves on both sides for flexible switch placement. It uses a PT tapered port thread type and a standard carbon steel piston rod. The rear adjuster functions strictly as a mechanical stop for fine-tuning end positions during commissioning, not as a load-holding lock.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X185-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 155-185 mm travel window during product size changeovers to set new retract positions without physically swapping the cylinder.
Use the 30 mm rear adjusting screw to fine-tune the final end position during machine commissioning, avoiding the need to bolt on external stops.
Accommodate varying package sizes on a line by adjusting the retract distance on the fly, ensuring precise positioning for each run.
Choose this 50 mm bore adjustable-stroke cylinder when your application requires precise end-position tuning without adding external stops or swapping components. For heavier loads, stepping up to a 63 mm bore provides 1559 N.
Because the stroke is under 300 mm, side-load stress on the 20 mm rod is manageable, though an external guide remains best practice for heavy lateral loads. This model is dimensionally interchangeable per ISO 15552 mounting interfaces and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the air cushion and rear stopper do not hold loads without live air; for true load-holding, consider the SAIL or BSAI series.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster acts as a mechanical stop that lets you shorten the 185 mm nominal stroke by up to 30 mm, creating a 155-185 mm usable travel window. It requires live air to function and does not lock or hold the load in place.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.