
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X210-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 210mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X210-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear mechanical stroke adjuster. It provides a nominal 210 mm travel that can be finely dialed back by up to 10 mm, yielding a precise 200-210 mm usable end-position window.
This unit features a carbon steel piston rod with an M16x1.5 thread, paired with PT (tapered) G1/4 air ports. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. It supports a standard mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting the FB, CA, CB, and CR variants.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X210-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 200-210 mm retract distance during machine setup to perfect end-of-stroke positioning without changing hardware.
Quickly adjust the stroke by a few millimeters on packaging lines when switching to a slightly different carton size.
The 10 mm rear adjustment is ideal for final commissioning tweaks or minor product changeovers, preventing the need to swap out a fixed-stroke SAI cylinder or bolt on external stopper blocks.
Because the nominal 210 mm stroke is under the 300 mm threshold, side-loading risks are moderate, but an external guide is still recommended for heavy lateral loads. Remember that the rear adjuster acts strictly as a travel stop and cannot hold a load without live air pressure; for true fail-safe load holding, consider the SAIL or BSAI series instead.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stopper, allowing you to shorten the effective stroke by up to 10 mm. This creates a usable travel window of 200 to 210 mm, enabling fine-tuning of the end position at commissioning without replacing the cylinder.
At an operating pressure of 0.5 MPa, this 50 mm bore cylinder generates a push (extend) force of 982 N and a pull (retract) force of 825 N. It can deliver up to 200 kgf (approx 1960 N) at its maximum rated pressure of 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.