
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X280-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X280-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits a usable travel window of 180-280 mm. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position feedback.
This adjustable-stroke design allows you to fine-tune the retract end position at commissioning or during product changeover without swapping the entire cylinder. The rear adjuster functions purely as a travel stop to set the end position and relies on the integrated variable air cushion for deceleration. It is not a locking mechanism, meaning live air pressure is required to hold the load in place.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end position within the 180-280 mm window when switching product sizes on a packaging line, eliminating the need for external physical stops.
Fine-tune the retract stroke during commissioning to perfectly seat components without disassembling the cylinder or altering the mounting footprint.
Adjust the travel distance of a diverter arm on the fly to handle different package lengths on a single conveyor system.
The 100 mm adjustment range is ideal for machinery requiring significant travel flexibility during setup or product-size changes, offering a distinct advantage over a fixed-stroke SAI cylinder. Since the nominal stroke is 280 mm, ensure adequate guidance for the load, as long unsupported strokes increase side-load stress on the piston rod.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 280 mm nominal stroke, 100 mm adjustment, PT tapered port thread, and standard carbon steel rod. This model does not include a magnet, so it requires external sensors or a switch to the -S variant if CMSE reed or DMSE electronic sensors are needed. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
Quick checklist
The maximum force at 1.0 MPa is 200 kgf.
The rear adjuster acts as a mechanical stop, allowing you to shorten the effective travel from the nominal 280 mm down to 180 mm. This stopper sets the end position but does not lock the load; live air pressure is still required to hold the load in place.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.