
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X280-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X280-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 280 mm nominal stroke that can be dialed back by up to 10 mm, providing a precise 270-280 mm usable travel window for fine-tuning the retract end position during commissioning.
This model includes a standard magnet (-S) for compatibility with AirTAC CMSE reed and DMSE electronic sensors, which mount directly into the dual-side sensor grooves on the extruded aluminum barrel. The 20 mm carbon steel rod and M16x1.5 thread provide robust resistance to side loads, though the 280 mm stroke length still warrants an external guide if the load is unsupported. It uses a G1/4 port and includes adjustable air cushions at both ends to decelerate moving masses smoothly.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 270-280 mm retract end-stop during initial machine commissioning without machining new spacers or changing the cylinder.
Quickly adapt the stroke window on production lines handling varying product lengths by turning the rear adjustment screw.
Provide a fine-tuned physical stop for conveyor diverter arms or gating mechanisms that need precise, repeatable travel limits.
Choose this 50 mm bore adjustable-stroke cylinder when your machine setup requires exact end-position tuning without swapping out components or adding external stops.
The rear adjuster on this SAIJ cylinder acts strictly as a mechanical travel stop, not a lock; it cannot hold a load without continuous live air pressure. For applications requiring true fail-safe load holding, consider the SAIL or BSAI cylinder series. This SAIJ50X280-10-S variant is dimensionally interchangeable per ISO 15552, features a PT tapered G1/4 port, and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster acts as an external stopper that lets you shorten the effective stroke by up to 10 mm, creating a 270-280 mm usable travel window. It allows you to fine-tune the end position at commissioning without replacing the cylinder or adding external stops.
It operates at speeds between 30 and 800 mm/s, and includes adjustable air cushions at both ends to manage deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.