
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X425-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 425mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X425-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 425 mm nominal stroke that can be dialed back by up to 30 mm, yielding a 395-425 mm usable travel window for precise end-position tuning during machine commissioning.
This extruded aluminum profile barrel features sensor grooves on both sides for flexible switch mounting. The carbon steel piston rod uses an M16x1.5 thread, and the unit breathes through a PT tapered G1/4 port. Because the stroke is 425 mm, an external guide is recommended to prevent rod sag and manage side loads over the extended travel distance.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X425-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 395-425 mm retraction point during machine setup to accommodate varying product lengths without changing hardware.
Quickly adjust the stroke stop on packaging lines when switching between different box sizes or conveyor widths.
Fine-tune the clamping travel on long-stroke machining fixtures where a fixed 425 mm stroke lacks the necessary overshoot buffer.
Select this 50 mm bore adjustable-stroke model when your fixture requires exact end-stop calibration without swapping cylinders or adding external mechanical stops. If you need less force, the 40 mm bore offers 628 N at 0.5 MPa; if your application demands more thrust, step up to the 63 mm bore which provides 1559 N. The rear adjuster acts solely as a travel stop to decelerate the load, not a lock. For dead-end load holding without live air pressure, consider the SAIL or BSAI series instead.
This unit is dimensionally interchangeable per ISO 15552. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. It operates at 30-800 mm/s with variable air cushions at both ends. Since no magnet is specified, position sensing requires adding a separate magnetic piston or external switches.
Quick checklist
At the maximum pressure of 1.0 MPa, it delivers up to 200 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from 425 mm down to as little as 395 mm. It decelerates the travel end but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.