
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X45-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 45mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X45-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 15-45 mm, allowing you to dial back the 45 mm nominal stroke by up to 30 mm during commissioning.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this standard configuration omits the -S magnet. It uses a PT tapered port thread and a 20 mm carbon steel rod with an M16x1.5 thread. The rear adjuster acts purely as a travel stop for end-position tuning; it does not lock the load, so an external guide or a SAIL lock cylinder is required for position holding without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X45-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the retract end-stop within the 15-45 mm window when switching product sizes on a packaging line, avoiding physical cylinder swaps.
Dial in the exact clamping distance for varying part thicknesses, using the rear adjuster to set the precise 15-45 mm travel limit without adding external stops.
Trim the effective stroke during initial machine commissioning to prevent over-travel and establish precise mechanical endpoints for automated assembly.
Choose this 50 mm bore adjustable cylinder when you need precise end-stop tuning on product changeovers rather than swapping a fixed-stroke SAI cylinder. For heavier loads, stepping up to a 63 mm bore provides 1559 N.
When matching ISO 15552 dimensions for replacement, verify the 45 mm stroke, 30 mm adjustment range, PT G1/4 port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 20 mm rod carries reasonable side-load capacity, this cylinder handles short-stroke duties well, but always use an external guide for unsupported loads.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjusting screw allows you to shorten the 45 mm nominal stroke by up to 30 mm, creating a usable travel window of 15-45 mm. The adjuster acts as a mechanical stop to fine-tune the end position and does not function as a lock to hold the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.