
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X450-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 450mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X450-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a generous 450 mm nominal stroke that can be dialed back by up to 100 mm, yielding a usable travel window of 350 to 450 mm for precise end-position tuning.
This extruded aluminum profile cylinder includes sensor grooves on both sides and uses standard PT tapered port threads (G1/4). The rear stopper mechanism allows you to trim the retract position during commissioning without adding external stops. Note that this adjuster acts only as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X450-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 350-450 mm end-stop during format changes on packaging lines without physically replacing the cylinder.
Adjust the retract stroke on the fly to handle different package sizes on a single conveyor diverter station.
Fine-tune the final end position during machine commissioning to perfect tooling alignment without external stopper blocks.
Choose this 50 mm bore when you need more thrust than a 40 mm cylinder (628 N at 0.5 MPa) but want a smaller footprint than a 63 mm unit (1559 N). The 100 mm adjustment window is ideal for product changeovers, letting you shift the end-stop across a 350-450 mm range rather than swapping a fixed-stroke SAI cylinder. If your application requires holding a load without continuous air pressure, consider the SAIL or BSAI locking cylinders instead.
Because the 450 mm stroke is relatively long, the 20 mm carbon steel rod and M16x1.5 rod thread will experience greater leverage forces; always use an external guide to prevent side-loading damage. This model uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. It operates at speeds of 30-800 mm/s and is dimensionally interchangeable per ISO 15552.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 100 mm, creating a usable travel window of 350 to 450 mm. This stopper only sets the travel end and does not function as a lock to hold the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.