
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X475-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 475mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X475-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down to a 445-475 mm window. The extruded aluminum barrel includes sensor grooves on both sides for straightforward detection integration.
This model uses a 20 mm carbon steel rod with an M16x1.5 thread, providing a robust interface for standard loads. It features PT tapered ports and adjustable air cushions at both ends to smooth out the 475 mm travel. Because the rear adjuster acts purely as a mechanical stop and does not lock the load, you must maintain live air pressure to hold position.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X475-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 445-475 mm travel window during product size transitions without swapping hardware.
Use the rear screw to precisely set the retract position for multi-stage assembly processes.
Fine-tune the stopping point of diverter arms handling varying package lengths on the line.
Choose this 50 mm bore when your application demands more force than the 40 mm version (528 N pull at 0.5 MPa) but does not require the heavier 63 mm class. The 30 mm adjustment range is ideal for product changeovers on a line, letting you shift the end-stop without physically swapping the cylinder or adding external stops. For fixed-position tasks without variation, a standard SAI cylinder is simpler.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 475 mm stroke, PT ports, and the required mounting accessory from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is 475 mm, the 20 mm rod will experience leverage forces under side-loading; always use an external guide rail to prevent premature seal wear.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 200 kgf.
The rear adjuster screw lets you shorten the 475 mm nominal stroke by up to 30 mm, creating a 445-475 mm usable travel window. It acts as a mechanical stop to fine-tune the end position during commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.