
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X475-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 475mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X475-75 is a double-acting, double-rod ISO 15552 profile cylinder engineered for applications requiring exact end-position tuning. It features a 475mm nominal stroke equipped with a rear adjusting screw, providing a usable travel window of 400-475mm. This built-in stopper allows you to dial back the stroke by up to 75mm during commissioning or product changeovers without swapping the cylinder or adding external stops.
This extruded aluminum profile cylinder includes variable air cushions at both ends to manage deceleration across its 30-800mm/s operating speed. The rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI variants. This model supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X475-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the retract end-position by up to 75mm to accommodate different product lengths on the same line without changing hardware.
Fine-tune the 475mm stroke during initial commissioning to achieve precise mechanical alignment without fabricating external spacers.
Dial in the exact pusher distance within the 400-475mm travel window to handle varying package sizes on a sorting conveyor.
Selecting the SAIJ50X475-75 makes sense when your machine setup requires variable end stops or fine-tuning within a 400-475mm travel window. Conversely, heavier loads might require the 63mm bore, which provides 1559N. Because this cylinder features a 475mm stroke, the 20mm diameter carbon steel rod will experience leverage forces under load; an external guide is recommended to prevent excessive side-loading and premature seal wear.
When specifying an ISO 15552 replacement, match the 50mm bore, 475mm stroke, 75mm adjustment range, PT port thread, and the desired mounting style. This standard configuration uses a carbon steel rod and does not include a magnet for sensors. If position feedback is required, you must select an -S variant to utilize the dual-side sensor grooves with AirTAC CMSE reed or DMSE electronic switches.
Quick checklist
At a maximum 1.0 MPa, it can deliver up to 200 kgf.
A rear mechanical screw acts as a stopper, allowing you to shorten the effective travel from the nominal 475mm down to 400mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.