
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X500-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 500mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X500-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel by up to 100 mm. With a 500 mm nominal stroke, this configuration yields a usable 400-500 mm travel window, enabling precise end-position tuning at commissioning without swapping the unit or bolting on external stops.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU omits the -S magnet option. The carbon steel rod features an M16x1.5 thread, and the unit supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. Standard PT tapered ports (G1/4) and variable air cushions at both ends complete the assembly.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X500-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 400-500 mm travel window during format changes on packaging lines without physically swapping the cylinder.
Fine-tune the retract end-position at commissioning to perfect seating against varying material thicknesses.
Use the 100 mm rear adjustment screw to establish custom stroke limits for testing and assembly fixtures.
Stepping down to a 40 mm bore drops the push force to 628 N, while upgrading to a 63 mm bore increases it to 1559 N. The 100 mm adjustment range is particularly useful for product-size changeovers on a line, allowing you to dial in the retract end-stop precisely. Because the rear adjuster acts only as a travel stop and the air cushions handle deceleration, neither will hold a load without live air pressure; for true load-holding, consider the SAIL or BSAI series.
When configuring your ISO 15552 replacement, match the 50 mm bore, 500 mm stroke, 100 mm adjustment, PT tapered port thread, and the appropriate mounting bracket. Given the 500 mm stroke length, the M16x1.5 carbon steel rod will carry substantial side loads, but long unsupported strokes still require an external guide to prevent binding.
Quick checklist
The rear adjuster acts as a mechanical stop that shortens the effective stroke by up to 100 mm. For the SAIJ50X500-100, this creates a usable travel window of 400-500 mm. It only sets the travel end and does not lock or hold the load without live air pressure.
At 0.9 MPa, the push force increases to 1767 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.