verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X65-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 65mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke65 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$85.11 $92.61Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30

The AirTAC SAIJ50X65-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. With a nominal 65mm stroke and a 30mm adjustment range, the usable travel window spans 35 to 65mm.

This extruded aluminum profile barrel omits tie-rods and integrates sensor grooves on both sides. It uses a G1/4 port and a 20mm carbon steel rod with an M16x1.5 thread. The rear stopper mechanism sets the retract end position, but it does not lock the load without live air pressure.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X65-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke65 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×65Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30 Is Used

tune

Machine Setup Tuning

Dial in the exact retract position during equipment commissioning without machining custom spacers or swapping cylinders.

settings_input_component

Product Size Changeover

Quickly adjust the 35-65mm travel window on packaging lines when handling different package dimensions.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30 the Right Cylinder?

Choose this 50mm bore when an application requires more thrust than a 40mm bore (628N at 0.5 MPa) but less than a 63mm bore (1559N at 0.5 MPa). The adjustable stroke is ideal for product changeovers or commissioning setups where the exact end position varies slightly. If you need a fixed end position, the standard SAI cylinder is a simpler alternative.

This SAIJ model is dimensionally interchangeable per ISO 15552. To match this replacement, specify a 50mm bore, 65mm stroke, 30mm adjustment, PT tapered port thread, carbon steel rod, no magnet, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). For load-holding without live pressure, consider the SAIL or BSAI series instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30 FAQ

At 0.7 MPa, the push force increases to 1374N.

The rear adjuster acts as a stopper to shorten the nominal 65mm stroke by up to 30mm, giving an effective travel window of 35 to 65mm. It only sets the end position and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X65-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.