verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30S

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X65-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 65mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke65 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$88.83 $96.33Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30S

It features a carbon steel rod, PT tapered port threads, and an integrated magnet for position sensing. By turning the rear screw, you can trim the effective travel anywhere within a 35-65mm window to perfectly dial in the retract end position without swapping hardware.

This adjustable stopper lets you fine-tune the stroke during commissioning or product changeovers, eliminating the need for external stops. The rear adjuster acts strictly as a travel stop and does not hold the load without live air. For position sensing, the internal magnet works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches mounted in the dual-side sensor grooves.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30S Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X65-30S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke65 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30S

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×65Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30S Is Used

tune

Product Changeover

Quickly dial in the 35-65mm stroke window when switching between part sizes on a packaging line, avoiding mechanical rebuilds.

precision_manufacturing

End-Stop Calibration

Fine-tune the retract position during machine commissioning to achieve exact clamping or pressing depths without adding external stops.

settings_input_component

Sensor-Driven Sorting

Leverage the internal magnet with DMSE electronic sensors to confirm retract positions across the adjusted travel range.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30S the Right Cylinder?

The adjustable 35-65mm travel window is ideal for machines that process multiple product sizes, allowing operators to reposition the end-stop quickly rather than changing the cylinder. Since the stroke is under 300mm, side-load stress is minimal, though the 20mm rod diameter handles standard loads well.

When ordering a replacement, verify the 50mm bore, 65mm nominal stroke, 30mm adjustment range, PT port threads, and the -S magnet option. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. Remember that neither the rear adjuster nor the air cushions function as a lock; if the load must be held without air pressure, consider an AirTAC SAIL or BSAI cylinder.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30S FAQ

At 0.7MPa, the push force increases to 1374N.

The rear adjuster screw allows you to shorten the 65mm nominal stroke by up to 30mm, providing an effective adjustable travel window of 35-65mm. It functions as a mechanical stop and does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X65-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.