
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X65-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 65mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X65-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The rear stopper allows you to dial back the 65mm nominal stroke by up to 40mm, creating a precise 25-65mm usable travel window for exact end-position tuning without adding external stops.
This model features a PT tapered port and extruded aluminum barrel with sensor grooves on both sides. It uses a reduced mounting interface set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR options. The rear adjuster acts solely as a travel stop to set deceleration endpoints and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 25-65mm travel window during setup to hit exact retract positions without swapping cylinders or adding external stopper blocks.
Quickly adjust the end-stop on a packaging line when product sizes change, using the 40mm adjustment range to adapt the stroke on the fly.
If your setup needs less force, stepping down to a 40mm bore yields 628N; if you need more, a 63mm bore provides 1559N. The SAIJ50X65-40 is selected over a fixed-stroke SAI when commissioning requires fine-tuning the retract position within that 25-65mm window rather than machining external stoppers.
Because the 65mm stroke is relatively short, side-load stress is minimal, though the robust 20mm rod still handles standard loads well. Remember that the rear adjuster is a stop, not a lock; for load-holding without live air, consider an AirTAC SAIL or BSAI cylinder. To replace this ISO 15552 cylinder, match the 50mm bore, 65mm stroke, PT port, and the chosen mounting kit.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.
The rear adjuster screw allows you to shorten the 65mm nominal stroke by up to 40mm, creating a usable travel window of 25-65mm. This stopper sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.